Chlorella sorokiniana IAM C-212 has long been maintained in slant culture as a mixed strain, representing an associated natural microbial consortium. In this study, the consortium was separated and five nonalgal constituents, a fungal strain (CSSF-1), and four bacterial strains (CSSB-1, CSSB-2, CSSB-3, and CSSB-4) were isolated and identified. 16S rDNA sequence analysis revealed that strains CSSB-1, CSSB-2, CSSB-3, and CSSB-4 were close to Ralstonia pickettii (99.8% identity), Sphingomonas sp. DD38 (99.4% identity), Microbacterium trichotecenolyticum (98.6% identity), and Micrococcus luteus (98.6% identity) respectively. 18S rDNA sequence analysis revealed that strain CSSF-1 resembled Acremonium-like hyphomycete KR21-2 (98.8%). The fungal strain CSSF-1 and one of the bacterial strains, CSSB-3, were found to promote the growth of Chlorella while the presence of bacterial strains CSSB-1 and CSSB-2 had no effect. Strain CSSB-4 could not be subcultured so its role was not elucidated. These results show that the interaction between Chlorella and its symbionts under photoautotrophic conditions involved both mutualism and commensalisms. The chlorophyll content of mixed strain was stable in long-term cultivation (7 months) while the chlorophyll content of a pure culture showed a marked decline. Electron microscopic analysis showed the two bacterial strains CSSB-2 and CSSB-3 were harbored on the sheath excreted by Chlorella, while the fungal strain CSSF-1 and the bacterial strain CSSB-1 directly adhered to the Chlorella cell surface. This report is the first observation of a symbiotic relationship among fungus, bacteria, and Chlorella, and the first observation of direct adhesion of fungus and bacteria to Chlorella in a consortium.

The batch culture of a newly isolated strain of a green microalga, Chlorella sorokiniana, was carried out using a conical helical tubular photobioreactor. The isolate was capable of good growth at 40 degrees C under an airstream enriched with 10% CO2. The maximum photosynthetic productivity was 34.4 g of dry biomass/(m2 of installation area x d) (12-h light/12-h dark cycle) when the cells were illuminated with an average photosynthetic photon flux density (photosynthetically active radiation ([PAR] 400-700 nm) simulating the outdoors in central Japan (0.980 mmol photons/[m2 x s]). This corresponded to a photosynthetic efficiency of 8.67% (PAR), which was defined as the percentage of the light energy recovered as biomass (394 kJ/[reactor x d]) to the total light energy received (4545 kJ/[reactor x d]). A similarly high photosynthetic efficiency (8.12% [PAR]) was also attained in the combined presence of 10% CO2, 100 ppm of NO, and 25 ppm of SO2. Moreover, good photosynthetic productivity was also obtained under high temperature and high light intensity conditions (maximum temperature, 46.5 degrees C; 1.737 mmol photons/[m2 x s]), when simulating the strong irradiance of the midday summer sun. This strain thus appears well suited for practical application for converting CO2 present in the stack gases emitted by thermal power plants and should be feasible even during the hot summer weather.

The photosynthetic performance of a helical tubular photobioreactor ("Biocoil"), incorporating the filamentous cyanobacterium Spirulina platensis, was investigated. The photobioreactor was constructed in a cylindrical shape (0.9 m high) with a 0.25-m(2)basal area and a photostage comprising 60 m of transparent PVC tubing of 1.6-cm inner diameter (volume = 12.1 L). The inner surface of the cylinder (area = 1.32 m(2)) was illuminated with cool white fluorescent lamps; the energy input of photosynthetically active radiation(PAR, 400 to 700 nm) into the photobioreactor was 2920 kJ per day. An air-lift system ncorporating 4%CO(2) was used to circulate the growth medium in the tubing. The maximum productivity achieved in batch culture was 7.18 g dry biomass per day [0.51 g . d biomass/L . day, or 5.44 g . d biomass/m(2)(inner surface of cylindrical shape)/day] which corresponded to a photosynthetic (PAR) efficiency of 5.45%. The CO(2) was efficiently removed from the gaseous stream; monitoring the CO(2) the outlet and inlet gas streams showed a 70% removal of CO(2) from the inlet gas over an 8-h period with almost maximum growth rate. (c) 1995 John Wiley & Sons, Inc.