Layered MAX phases are exfoliated into 2D single layers and multilayers, so-called MXenes. Using fi rst-principles calculations, the formation and electronic properties of various MXene systems, M 2 C (M = Sc, Ti, V, Cr, Zr, Nb, Ta) and M 2 N (M = Ti, Cr, Zr) with surfaces chemically functionalized by F, OH, and O groups, are examined. Upon appropriate surface functionalization, Sc 2 C, Ti 2 C, Zr 2 C, and Hf 2 C MXenes are expected to become semiconductors. It is also derived theoretically that functionalized Cr 2 C and Cr 2 N MXenes are magnetic. Thermoelectric calculations based on the Boltzmann theory imply that semiconducting MXenes attain very large Seebeck coefficients at low temperatures.
Nanoporous carbon particles with magnetic Co nanoparticles (Co/NPC particles) are synthesized by one-step carbonization of zeolitic imidazolate framework-67 (ZIF-67) crystals. After the carbonization, the original ZIF-67 shapes are preserved well. Fine magnetic Co nanoparticles are well dispersed in the nanoporous carbon matrix, with the result that the Co/NPC particles show a strong magnetic response. The obtained nanoporous carbons show a high surface area and well-developed graphitized wall, thereby realizing fast molecular diffusion of methylene blue (MB) molecules with excellent adsorption performance. The Co/NPC possesses an impressive saturation capacity for MB dye compared with the commercial activated carbon. Also, the dispersed magnetic Co nanoparticles facilitate easy magnetic separation.
A newly synthesized family of two-dimensional transition metal carbides and nitrides, so-called MXenes, exhibit metallic or semiconducting properties upon appropriate surface functionalization. Owing to their intrinsic ceramic nature, MXenes may be suitable for energy conversion applications at high temperature. Using the Boltzmann theory and first-principles electronic structure calculations, we explore the thermoelectric properties of monolayer and multilayer M2C (M = Sc, Ti, V, Zr, Nb, Mo, Hf, and Ta) and M2N (M = Ti, Zr, and Hf) MXenes functionalized with F, OH, and O groups. From our calculations, it turns out that monolayer and multilayer nanosheets of Mo2C acquire superior power factors to other MXenes upon any type of functionalization. We therefore propose the functionalized Mo2C nanosheets as potential thermoelectric materials of the MXene family. The exceptional thermoelectric properties of the functionalized Mo2C nanosheets are attributed to the peculiar t2g band shapes, which are a combination of flat and dispersive portions. These types of band shapes allow Mo2C to gain a large Seebeck coefficient and simultaneously a good electrical conductivity at low carrier concentrations.
The electric current activated/assisted sintering (ECAS) is an ever growing class of versatile techniques for sintering particulate materials. Despite the tremendous advances over the last two decades in ECASed materials and products there is a lack of comprehensive reviews on ECAS apparatuses and methods. This paper fills the gap by tracing the progress of ECAS technology from 1906 to 2008 and surveys 642 ECAS patents published over more than a century. It is found that the ECAS technology was pioneered by Bloxam (1906 GB Patent No. 9020) who developed the first resistive sintering apparatus. The patents were searched by keywords or by cross-links and were withdrawn from the Japanese Patent Office (342 patents), the United States Patent and Trademark Office (175 patents), the Chinese State Intellectual Property Office of P.R.C. (69 patents) and the World Intellectual Property Organization (12 patents). A subset of 119 (out of 642) ECAS patents on methods and apparatuses was selected and described in detail with respect to their fundamental concepts, physical principles and importance in either present ECAS apparatuses or future ECAS technologies for enhancing efficiency, reliability, repeatability, controllability and productivity. The paper is divided into two parts, the first deals with the basic concepts, features and definitions of basic ECAS and the second analyzes the auxiliary devices/peripherals. The basic ECAS is classified with reference to discharge time (fast and ultrafast ECAS). The fundamental principles and definitions of ECAS are outlined in accordance with the scientific and patent literature.
Nanoporous carbons (NPCs) have large specific surface areas, good electrical and thermal conductivity, and both chemical and mechanical stability, which facilitate their use in energy storage device applications. In the present study, highly graphitized NPCs are synthesized by one-step direct carbonization of cobalt-containing zeolitic imidazolate framework-67 (ZIF-67). After chemical etching, the deposited Co content can be completely removed to prepare pure NPCs with high specific surface area, large pore volume, and intrinsic electrical conductivity (high content of sp(2) -bonded carbons). A detailed electrochemical study is performed using cyclic voltammetry and galvanostatic charge-discharge measurements. Our NPC is very promising for efficient electrodes for high-performance supercapacitor applications. A maximum specific capacitance of 238 F g(-1) is observed at a scan rate of 20 mV s(-1) . This value is very high compared to previous works on carbon-based electric double layer capacitors.
Dielectrophoresis is used to align carbon nanotubes (CNTs) within gelatin methacrylate (GelMA) hydrogels in a facile and rapid manner. Aligned GelMA-CNT hydrogels show higher electrical properties compared with pristine and randomly distributed CNTs in GelMA hydrogels. The muscle cells cultured on these materials demonstrate higher maturation compared with cells cultured on pristine and randomly distributed CNTs in GelMA hydrogels.
Biological scaffolds with tunable electrical and mechanical properties are of great interest in many different fields, such as regenerative medicine, biorobotics, and biosensing. In this study, dielectrophoresis (DEP) was used to vertically align carbon nanotubes (CNTs) within methacrylated gelatin (GelMA) hydrogels in a robust, simple, and rapid manner. GelMA-aligned CNT hydrogels showed anisotropic electrical conductivity and superior mechanical properties compared with pristine GelMA hydrogels and GelMA hydrogels containing randomly distributed CNTs. Skeletal muscle cells grown on vertically aligned CNTs in GelMA hydrogels yielded a higher number of functional myofibers than cells that were cultured on hydrogels with randomly distributed CNTs and horizontally aligned CNTs, as confirmed by the expression of myogenic genes and proteins. In addition, the myogenic gene and protein expression increased more profoundly after applying electrical stimulation along the direction of the aligned CNTs due to the anisotropic conductivity of the hybrid GelMA-vertically aligned CNT hydrogels. We believe that platform could attract great attention in other biomedical applications, such as biosensing, bioelectronics, and creating functional biomedical devices.
The controlled development of texture is one of the ways for effectively improving physical and mechanical properties. In this review paper, we introduce a new processing of textured ceramics with a feeble magnetic sus ceptibility by slip casting in a high magnetic field and subsequent heating. As an example of feeble magnetic ceramics, we demonstrate the fabrication of textured alumina in details. The susceptibility of diamagnetic aalu mina is very small, but the orientation energy of the alumina particle by a high magnetic field becomes greater than the thermal energy. aAlumina with a rhombohedral structure shows anisotropic susceptibility, but this anisotropy has up to now been more or less ignored due to its very low value. However, in a high magnetic field, the energy of crystal anisotropy becomes comparable to or greater than the energy of thermal motion. The degree of orientation depends on the processing factors, such as heating temperature, particle size, applied magnetic field, concentration of the suspension, etc. This process technique confers several advantages and it is possible for this type of processing to be applied to other noncubic ceramics, such as TiO 2 , ZnO, SnO, hydrooxy apatite (HAP), AlN, SiC, Si 3 N 4 , etc.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.