For this study, we developed a magnetic resonance (MR)-compatible vibrotactile stimulator using a planar-coiltype actuator. The newly developed vibrotactile stimulator consists of three units: control unit, drive unit, and planarcoil-type actuator. The control unit controls frequency, intensity, time, and channel, and transfers the stimulation signals to the drive unit. The drive unit operates the planar-coil-type actuator in response to commands from the control unit. The planar-coil-type actuator, which uses a planar coil instead of conventional electric wire, generates vibrating stimulation through interaction of the current of the planar coil with the static magnetic field of the MR scanner. Even though the developed tactile stimulating system is small, simple, and inexpensive, it has a wide range of stimulation frequencies (20~400 Hz, at 40 levels) and stimulation intensities (0~7 V, at 256 levels). The stimulation intensity does not change due to frequency changes. Since the transient response time is a few microseconds, the stimulation time can be controlled on a scale of microseconds. In addition, this actuator has the advantages of providing highly repeatable stimulation, being durable, being able to assume various shapes, and having an adjustable contact area with the skin. The new stimulator operated stably in an MR environment without affecting the MR images. Using functional magnetic resonance imaging, we observed the brain activation changes resulting from stimulation frequency and intensity changes.
For this study, we developed a simple pressure and heat stimulator that can quantitatively control pressure and provide heat stimulation to intra- and interdigit areas. The developed stimulator consists of a control unit, drive units, and tactors. The control unit controls the stimulation parameters, such as stimulation types, intensity, time, and channel, and transmits a created signal of stimulation to the drive units. The drive units operate pressure and heat tactors in response to commands from the control unit. The pressure and heat tactors can display various stimulation intensities quantitatively, apply stimulation continuously, and adjust the stimulation areas. Additionally, they can easily be attached to and detached from the digits. The developed pressure and heat stimulator is small in total size, easy to install, and inexpensive to manufacture. The new stimulator operated stably in a magnetic resonance imaging (MRI) environment without affecting the obtained images. A preliminary functional magnetic resonance imaging (fMRI) experiment confirmed that differences in activation of somatosensory areas were induced from the pressure and heat stimulation. The developed pressure and heat stimulator is expected to be utilized for future intra- and interdigit fMRI studies on pressure and heat stimulation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.