The critical element for sustainable growth in the construction industry is the development of alternative cements. A new technological process called geopolymerization provides an innovative solution, and the presence of aluminum and silicon oxides in fly ash has encouraged its use as a source material. Many previous investigations have involved curing the binder in a heated environment. To reduce energy consumption during the synthesis of geopolymers, the present study investigated the properties of ambient cured geopolymer mortar at early ages. An experimental program was executed to establish a relationship between the activator composition and the properties of geopolymer mortar in fresh and hardened states. Concentrations of sodium hydroxide and sodium silicate were ascertained that are advantageous for constructability and mechanical behavior. Scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction techniques were also used to characterize the material. Test results indicate that there is potential for the concrete industry to use fly ash based geopolymer as an alternative to portland cement.
Fiber reinforced aerated lightweight concrete (FALC) was developed to reduce concrete's density and to improve its fire resistance, thermal conductivity, and energy absorption. Compression tests were performed to determine basic properties of FALC. The primary independent variables were the types and volume fraction of fibers, and the amount of air in the concrete. Polypropylene and carbon fibers were investigated at 0, 1, 2, 3, and 4% volume ratios. The lightweight aggregate used was made of expanded clay. A self-compaction agent was used to reduce the water-cement ratio and keep good workability. A surfactant was also added to introduce air into the concrete. This study provides basic information regarding the mechanical properties of FALC and compares FALC with fiber reinforced lightweight concrete. The properties investigated include the unit weight, uniaxial compressive strength, modulus of elasticity, and toughness index. Based on the properties, a stress-strain prediction model was proposed. It was demonstrated that the proposed model accurately predicts the stress-strain behavior of FALC.
Microsurfacing has been utilized in the United States since 1980 as a maintenance treatment for pavement. This paper reviews the benefits, limitations, and factors that contribute to successful applications of microsurfacing. The history of microsurfacing, as well as a definition and process description of the treatment, is included. The body of scientific work on microsurfacing is shown to promote its use in preventative maintenance programs, and the potential for microsurfacing to meet tightening environmental and budgetary restrictions is discussed. Suggestions are given for future research to expand microsurfacing’s applications and efficacy stemming from the ability of microsurfacing to be cold-applied and utilize polymers in the bitumen.
Abstract:The major environmental impact of concrete comes from the CO 2 emissions, produced during the cement manufacturing process. The main goal of this research project is to evaluate the efficiency of limestone powder as a partial cement replacement, in order to reduce energy consumption and CO 2 emissions. This study utilizes limestone powders, with different particle sizes, to replace a portion of Portland cement using various ratios. Due to the dilution effect when partially replacing cement, there is a reduction in the concrete's physical properties. To assess the dilution effect, a modification to Féret's equation is used to calculate an efficiency factor for the limestone powder when compared to cement. To measure the environmental impact, a life cycle assessment is conducted on concrete made with limestone powder combined with cement. This allows for an evaluation of the various cement/limestone powder ratios that will maximize the environmental benefit, with minimal reduction in concrete strength. Additional microstructural analysis using petrographic examination was completed to provide a visual understanding of the distribution of the limestone particles within the cement paste. The results indicate that the efficiency of limestone powder in partially replacing cement can be achieved by particle packing and particle distribution in the concrete and the benefits of emission reductions exceed the loss in compressive strength when higher levels of limestone powder is used to replace cement.
Geosynthetics is a crucial mechanism in which the earth structures can be mechanically stabilized through strength enforcing tensile reinforcement. Moreover, geosynthetic reinforcement stabilizes steep slopes through incorporating the polymeric materials, becoming one of the most cost-effective methods in not only accommodating budgetary restrictions but also alleviating space constraints. In order to explicate on the applicability and widen the understanding of geosynthetic reinforcement technology, a synthesis study was conducted on geosynthetic reinforced steep slope. This study is very important because in not only highlighting the advantages and limitations of using geosynthetic reinforcement but also in investigating the current construction and design methods with a view to determining which best practices can be employed. Furthermore, this study also identified and assessed the optimal condition of the soil, performance measures, construction specifications, design criteria, and geometry of the slope. To further concretize the understanding of these parameters or factors, two case studies were reviewed and a summary of the best practices, existing methods, and recommendations were drawn in order to inform the employment of geosynthetics in reinforcing steep slopes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.