Pressure sensors with 3D conformability are highly desirable components for artificial electronic skin or e-textiles that can mimic natural skin, especially for application in real-time monitoring of human physiological signals. Here, a nanofiber based electronic skin with ultra-high pressure sensitivity and 3D conformability is designed and built by interlocking two elastic patterned nanofibrous membranes. The patterned membrane is facilely prepared by casting conductive nanofiber ink into a silicon mould to form an array of semi-spheroid-like protuberances. The protuberances composed of intertwined elastic POE nanofibers and PPy@PVA-co-PE nanofibers afford a tunable effective elastic modulus that is capable of capturing varied strains and stresses, thereby contributing to a high sensitivity for pressure sensing. This electronic skin-like sensor demonstrates an ultra-high sensitivity (1.24 kPa(-1)) below 150 Pa with a detection limit as low as about 1.3 Pa. The pixelated sensor array and a RGB-LED light are then assembled into a circuit and show a feasibility for visual detection of spatial pressure. Furthermore, a nanofiber based proof-of-concept wireless pressure sensor with a bluetooth module as a signal transmitter is proposed and has demonstrated great promise for wireless monitoring of human physiological signals, indicating a potential for large scale wearable electronic devices or e-skin.
Background: To systematically review the epidemiologic relationship between periodontitis and type 2 diabetes mellitus (T2DM). Methods: Four electronic databases were searched up until December 2018. The manual search included the reference lists of the included studies and relevant journals. Observational studies evaluating the relationship between T2DM and periodontitis were included. Meta-analyses were conducted using STATA. Results: A total of 53 observational studies were included. The Adjusted T2DM prevalence was significantly higher in periodontitis patients (OR = 4.04, p = 0.000), and vice versa (OR = 1.58, p = 0.000). T2DM patients had significantly worse periodontal status, as reflected in a 0.61 mm deeper periodontal pocket, a 0.89 mm higher attachment loss and approximately 2 more lost teeth (all p = 0.000), than those without T2DM. The results of the cohort studies found that T2DM could elevate the risk of developing periodontitis by 34% (p = 0.002). The glycemic control of T2DM patients might result in different periodontitis outcomes. Severe periodontitis increased the incidence of T2DM by 53% (p = 0.000), and this result was stable. In contrast, the impact of mild periodontitis on T2DM incidence (RR = 1.28, p = 0.007) was less robust. Conclusions: There is an evident bidirectional relationship between T2DM and periodontitis. Further well-designed cohort studies are needed to confirm this finding. Our results suggest that both dentists and physicians need to be aware of the strong connection between periodontitis and T2DM. Controlling these two diseases might help prevent each other's incidence.
Bone tumors, especially those in osteosarcoma, usually occur in adolescents. The standard clinical treatment includes chemotherapy, surgical therapy, and radiation therapy. Unfortunately, surgical resection often fails to completely remove the tumor, which is the main cause of postoperative recurrence and metastasis, resulting in a high mortality rate. Moreover, bone tumors often invade large areas of bone, which cannot repair itself, and causes a serious effect on the quality of life of patients. Thus, bone tumor therapy and bone regeneration are challenging in the clinic. Herein, this review presents the recent developments in bifunctional biomaterials to achieve a new strategy for bone tumor therapy. The selected bifunctional materials include 3D-printed scaffolds, nano/microparticle-containing scaffolds, hydrogels, and bone-targeting nanomaterials. Numerous related studies on bifunctional biomaterials combining tumor photothermal therapy with enhanced bone regeneration were reviewed. Finally, a perspective on the future development of biomaterials for tumor therapy and bone tissue engineering is discussed. This review will provide a useful reference for bone tumor-related disease and the field of complex diseases to combine tumor therapy and tissue engineering.
Electrospun carbon nanofibers (CNF) have been prepared at different calcination temperatures for a prolonged time (12 h) derived from electrospun polyacrylonitrile (PAN) membranes. They are studied as anode materials in lithium ion batteries due to their high reversible capacity, improved long-term cycle performance, and good rate capacity. The fibrous morphologies of fresh electrodes and tested samples for more than 550 cycles have been compared; cyclic voltammogram (CV) has also been studied to understand the lithium intercalation/deintercalation mechanism of 1D nanomaterials. CNFs demonstrate interesting galvanostatic performance with fading capacity after the first few cycles, and the capacity increases during long-term cycling. The increasing capacity is observed accompanied by volumetric expansion on the nanofibers' edge. Results of rate capacity have also been explored for all CNF samples, and their stable electrochemical performances are further analyzed by the galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS). CNF carbonized at 800 °C is found to have a larger lithium ion storage ability and better cyclic stability than that carbonized at 600 and 1000 °C.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.