The optical conductance of monolayer graphene is defined solely by the fine structure constant, α = e 2 /ћc (where e is the electron charge, ћ is Dirac's constant and c is the speed of light). The absorbance has been predicted to be independent of frequency. In principle, the interband optical absorption in zero-gap graphene could be saturated readily under strong excitation due to Pauli blocking. Here, we demonstrate the use of atomic layer graphene as saturable absorber in a mode-locked fiber laser for the generation of ultrashort soliton pulses (756 fs) at the telecommunication band. The modulation depth can be tuned in a wide range from 66.5% to 6.2% by varying the thickness of graphene. Our results suggest that ultrathin graphene films are potentially useful as optical elements in fiber lasers. Graphene as a laser mode locker can have many merits such as lower saturation intensity, ultrafast recovery time, tunable modulation depth and wideband tuneability.

ObjectiveThis study explores the clinical characteristics of patients with diabetes with severe covid-19, and the association of diabetes with survival duration in patients with severe covid-19.Research design and methodsIn this single-center, retrospective, observational study, the clinical and laboratory characteristics of 193 patients with severe covid-19 were collected. 48 patients with severe covid-19 had diabetes, and 145 patients (ie, the controls) did not have diabetes. A severe case was defined as including at least one of the following criteria: (1) Respiratory rate >30/min. (2) Oxygen saturation ≤93%. (3) PaO2/FiO2≤300 mm Hg. (4) Patients, either with shock or respiratory failure, requiring mechanical ventilation, or combined with other organ failure, requiring admission to intensive care unit (ICU).ResultsOf 193 patients with severe covid-19, 48 (24.9%) had diabetes. Compared with patients with severe covid-19 without diabetes, patients with diabetes were older, susceptible to receiving mechanical ventilation and admission to ICU, and had higher mortality. In addition, patients with severe covid-19 with diabetes had higher levels of leukocyte count, neutrophil count, high-sensitivity C reaction protein, procalcitonin, ferritin, interleukin (IL) 2 receptor, IL-6, IL-8, tumor necrosis factor α, D-dimer, fibrinogen, lactic dehydrogenase and N-terminal pro-brain natriuretic peptide. Among patients with severe covid-19 with diabetes, more non-survivors were men (30 (76.9%) vs 9 (23.1%)). Non-survivors had severe inflammatory response, and cardiac, hepatic, renal and coagulation impairment. Finally, the Kaplan-Meier survival curve showed a trend towards poorer survival in patients with severe covid-19 with diabetes than patients without diabetes. The HR was 1.53 (95% CI 1.02 to 2.30; p=0.041) after adjustment for age, sex, hypertension, cardiovascular disease and cerebrovascular disease by Cox regression. The median survival durations from hospital admission in patients with severe covid-19 with and without diabetes were 10 days and 18 days, respectively.ConclusionThe mortality rate in patients with severe covid-19 with diabetes is considerable. Diabetes may lead to an increase in the risk of death.

Alternating graphene (G) and titania (Ti0.91O2) multilayered nanosheets are fabricated using layer‐by‐layer electrostatic deposition followed by UV irradiation. Successful assemblies of graphene oxide (GO) and titania nanosheets in sequence with polyethylenimine as a linker is confirmed by UV–vis absorption and X‐ray diffraction. Photocatalytic reduction of GO into G can be achieved upon UV irradiation. Ultrafast photocatalytic electron transfer between the titania and graphene is demonstrated using femtosecond transient absorption spectroscopy. Efficient exciton dissociation at the interfaces coupled with cross‐surface charge percolation allows efficient photocurrent conversion in the multilayered Ti0.91O2/G films.

A new series of starburst triarylamine fluorophores SBCHO, DBCHO, CZCHO, CZCN, and SBCN, that incorporate diphenylamine or carbazole as the electron donor and dicyanovinyl or aldehyde as the electron acceptor, has been prepared and their photophysical properties are investigated. In sharp contrast to most red‐emitting dopants, which show serious aggregation‐caused quench phenomena, the new starburst triphenylamine derivatives reported here show unique enhanced emission in the solid state or upon aggregation. Organic light emitting diodes using these compounds as non‐doped host emitters and hole transporters have been fabricated. The highest external quantum yield reaches 2.09 % for CZCHO. SBCHO was investigated as a chlorine gas fluorescence (FL) solid‐film sensor for the first time. The high‐intensity emission was ‘turned off' immediately after being blown by Cl2 gas.

Single-crystal organic nanowires were fabricated with a soft-template-assisted self-assembly method in liquid phase. These nanowires with rectangular cross section can serve as resonators for exciton-photon coupling, leading to a microcavity effect and a relatively low threshold of laser actions. Two-photon-pumped blue lasing was observed in these organic waveguiding nanostructures above a threshold of 60 nJ, excited with a 750 nm near-infrared femtosecond pulse laser at 77 K.

No abstract

Laser displays, which exploit characteristic advantages of lasers, represent a promising next-generation display technology based on the ultimate visual experience they provide. However, the inability to obtain pixelated laser arrays as self-emissive full-color panels hinders the application of laser displays in the flat-panel sector. Due to their excellent optoelectronic properties and processability, organic materials have great potential for the production of periodically patterned multi-color microlaser arrays. Here, we demonstrate for the first time full-color laser displays on precisely patterned organic red-green-blue (RGB) microlaser matrices through inkjet printing. Individual RGB laser pixels are realized by doping respective luminescent dyes into the ink materials, resulting in a wide achievable color gamut 45% larger than the standard RGB space. Using as-prepared microlaser arrays as full-color panels, we achieve dynamic laser displays for video playing through consecutive beam scanning. These results represent a major step towards full-color laser displays with outstanding color expression.

Coherent light signals generated at the nanoscale are crucial to the realization of photonic integrated circuits. Self-assembled nanowires from organic dyes can provide both a gain medium and an effective resonant cavity, which have been utilized for fulfilling miniaturized lasers. Excited-state intramolecular proton transfer (ESIPT), a classical molecular photoisomerization process, can be used to build a typical four-level system, which is more favorable for population inversion. Low-power driven lasing in proton-transfer molecular nanowires with an optimized ESIPT energy-level process has been achieved. With high gain and low loss from the ESIPT, the wires can be applied as effective FP-type resonators, which generated single-mode lasing with a very low threshold. The lasing wavelength can be reversibly switched based on a conformation conversion of the excited keto form in the ESIPT process.