Supercapacitors with porous carbon structures have high energy storage capacity. However, the porous nature of the carbon electrode, composed mainly of carbon nanotubes (CNTs) and graphene oxide (GO) derivatives, negatively impacts the volumetric electrochemical characteristics of the supercapacitors because of poor packing density (<0.5 g cm(-3)). Herein, we report a simple method to fabricate highly dense and vertically aligned reduced graphene oxide (VArGO) electrodes involving simple hand-rolling and cutting processes. Because of their vertically aligned and opened-edge graphene structure, VArGO electrodes displayed high packing density and highly efficient volumetric and areal electrochemical characteristics, very fast electrolyte ion diffusion with rectangular CV curves even at a high scan rate (20 V/s), and the highest volumetric capacitance among known rGO electrodes. Surprisingly, even when the film thickness of the VArGO electrode was increased, its volumetric and areal capacitances were maintained.
Although there are numerous reports of high performance supercapacitors with porous graphene, there are few reports to control the interlayer gap between graphene sheets with conductive molecular linkers (or molecular pillars) through a π-conjugated chemical carbon-carbon bond that can maintain high conductivity, which can explain the enhanced capacitive effect of supercapacitor mechanism about accessibility of electrolyte ions. For this, we designed molecularly gap-controlled reduced graphene oxides (rGOs) via diazotization of three different phenyl, biphenyl, and para-terphenyl bis-diazonium salts (BD1-3). The graphene interlayer sub-nanopores of rGO-BD1-3 are 0.49, 0.7, and 0.96 nm, respectively. Surprisingly, the rGO-BD2 0.7 nm gap shows the highest capacitance in 1 M TEABF4 having 0.68 nm size of cation and 6 M KOH having 0.6 nm size of hydrated cation. The maximum energy density and power density of the rGO-BD2 were 129.67 W h kg(-1) and 30.3 kW kg(-1), respectively, demonstrating clearly that the optimized sub-nanopore of the rGO-BDs corresponding to the electrolyte ion size resulted in the best capacitive performance.
One of the most efficient and straightforward methods for production of graphene quantum dots (GQDs) could be their direct preparation from graphite powder by one-pot synthesis using high-powered microwave irradiation. It is believed that in this way, graphite can be multiply broken by repeated redox reactions, which leads to a high yield and mass production.
To prepare carbon-based fluorescent materials such as graphene quantum dots (GQDs), new and effective methods are needed to convert one-dimensional (1D) or two-dimensional (2D) carbon materials to 0D GQDs. Here, we report a novel acid-free and oxone oxidant-assisted solvothermal synthesis of GQDs using various natural carbon resources including graphite (G), multiwall carbon nanotubes (M), carbon fibers (CF), and charcoal (C). This acid-free method, not requiring the neutralization process of strong acids, exhibits a simple and eco-friendly purification process and also represents a recycling production process, together with mass production and high yield. Newly synthesized GQDs exhibited a strong blue photoluminescence (PL) under 365 nm UV light illumination. The PL emission peaks of all the recycled GQDs did not change.
A band gap tuning of environmental-friendly graphene quantum dot (GQD) becomes a keen interest for novel applications such as photoluminescence (PL) sensor. Here, for tuning the band gap of GQD, a hexafluorohydroxypropanyl benzene (HFHPB) group acted as a receptor of a chemical warfare agent was chemically attached on the GQD via the diazonium coupling reaction of HFHPB diazonium salt, providing new HFHPB-GQD material. With a help of the electron withdrawing HFHPB group, the energy band gap of the HFHPB-GQD was widened and its PL decay life time decreased. As designed, after addition of dimethyl methyl phosphonate (DMMP), the PL intensity of HFHPB-GQD sensor sharply increased up to approximately 200% through a hydrogen bond with DMMP. The fast response and short recovery time was proven by quartz crystal microbalance (QCM) analysis. This HFHPB-GQD sensor shows highly sensitive to DMMP in comparison with GQD sensor without HFHPB and graphene. In addition, the HFHPB-GQD sensor showed high selectivity only to the phosphonate functional group among many other analytes and also stable enough for real device applications. Thus, the tuning of the band gap of the photoluminescent GQDs may open up new promising strategies for the molecular detection of target substrates.
Porous polysaccharides have recently attracted attention due to their porosity, abundance, and excellent properties such as sustainability and biocompatibility, thereby resulting in their numerous applications. Recent years have seen a rise in the number of studies on the utilization of polysaccharides such as cellulose, chitosan, chitin, and starch as aerogels due to their unique performance for the fabrication of porous structures. The present review explores recent progress in porous polysaccharides, particularly cellulose and chitosan, including their synthesis, application, and future outlook. Since the synthetic process is an important aspect of aerogel formation, particularly during the drying step, the process is reviewed in some detail, and a comparison is drawn between the supercritical CO2 and freeze drying processes in order to understand the aerogel formation of porous polysaccharides. Finally, the current applications of polysaccharide aerogels in drug delivery, wastewater, wound dressing, and air filtration are explored, and the limitations and outlook of the porous aerogels are discussed with respect to their future commercialization.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.