It is traditionally considered that, due to the Hertzian contact force-deformation relationship, the stiffness of rolling bearings has stiffening characteristics, and gradually researchers find that the supporting characteristics of the system may stiffen, soften, and even coexist from them. The resonant hysteresis affects the stability and safety of the system, and its jumping effect can make an impact on the system. However, the ball bearing contains many nonlinearities such as the Hertzian contact between the rolling elements and raceways, bearing clearance, and time-varying compliances (VC), leading great difficulties to clarify the dynamical mechanism of resonant hysteresis of the system. With the aid of the harmonic balance and alternating frequency/time domain (HB-AFT) method and Floquet theory, this paper will investigate the hysteretic characteristics of the Hertzian contact resonances of a ball bearing system under VC excitations. Moreover, the linearized dynamic bearing stiffness of the system will be presented for assessing the locations of VC resonances, and the nonlinear characteristics of bearing stiffness will also be discussed in depth. Our analysis indicates that the system possesses many types of VC resonances such as the primary, internal, superharmonic, and even combination resonances, and the evolutions of these resonances are presented. Finally, the suppression of resonances and hysteresis of the system will be proposed by adjusting the bearing clearance.

Power-form nonlinear contact force models are widely adopted in relatively moving parts of macro (e.g., rolling bearings considering Hertzian contact restoring force between rolling elements and bearing raceways) or micro (e.g., the micro cantilever probe system of atomic force microscopy) scale mechanical systems, and contact resonance could cause serious problems of wear, contact fatigue, vibration, and noise, which has attracted widespread attention. In the present paper, the softening/hardening stiffness characteristics of continuous and one-sided contact power-form nonlinear spring models are addressed, respectively, by the analysis of the monotone features of resonant frequency-response skeleton lines. Herein, the period-n solution branch and its stability characteristics are obtained by the harmonic balance and alternating frequency/time domain (HB–AFT) method and Floquet theory. Compared with previous studies, this paper will furtherly clarify the influences of externally normal load, the power form exponent term, and excitation amplitude on the softening/hardening stiffness characteristics of general power-form spring systems. In addition, for a power-form system with a one-sided contact, the phenomena of primary and super/sub-harmonic hysteretic resonances inducing period-doubling, folding bifurcation, the coexistence of multiple solutions are demonstrated. Besides, it gives the evolution mechanism of two types of intermittency chaos in a one-sided contact system. The overall results may have certain basic theoretical significance and engineering values for the control of vibration and noise in contact mechanical systems.