This review provides insight into various nanostructures designed by spray pyrolysis and their applications in energy storage and conversion.

Supportinginformation and the ORCID identification number(s) for the author(s) of this article can be found under: https://doi.

Due to high ionic conductivity and low cost, Li1.4Al0.4Ti1.6(PO4)3 (LATP) has emerged as a promising solid‐state electrolyte for next‐generation lithium (Li) metal solid‐state batterie with high safety performance and energy density. However, the extremely high impedance and surface instability of LATP with Li metal retard its practical application. Herein, a novel method is proposed to construct an ultrathin ZnO layer that is tightly coated on the LATP pellets, surface (ZnO@LATP) via magnetron sputtering, which in situ reacts with Li to form a low electronic conductivity and multifunctional solid electrolyte interphase (SEI). The formed SEI can not only effectively lower the interfacial resistance, but also overcome the side reactions of LATP with the Li metal anode and suppress the Li dendrite growth. Specifically, the interface resistance decreases from 80 554 to 353 Ω and the overpotential reduces from 1 V to 20 mV. As a result, the Li/ZnO@LATP@ZnO/Li symmetric batteries can stably cycle for more than 2000 h without short circuit at 0.05 mA cm−2 and Li/ZnO@LATP/LiFePO4 batteries show excellent cycle stability for 200 cycles at 0.1 C. This work highlights the significance of multifunctional interphase between LATP and Li metal for improvement of interfacial impedance and instability.

Several studies on electrocatalytic materials have made substantial progress, and it is essential to enhance the catalytic activity of these materials.

Porous current collectors are conducive to enhance the property of Li metal anode. Unfortunately, congestion in diffusion path during plating process damages the effects of current collectors. Herein, we developed a 3D Cu skeleton with open micrometer-sized pores by NaCl-assisted powder-sintering method. The unobstructed pores of 3D Cu skeleton help to reduce congestion during plating, thus most of Li deposited inside the current collector. Besides, the large smooth surface promotes the deposition of Li with smooth spherical shape, which mitigating Li dendrite growth. As a result, better safety and rechargeability of Li metal anode were achieved in this design.

No abstract

Hexagonal nickel‐organic framework (Ni‐MOF) [Ni(NO3)2·6H2O, 1,3,5‐benzenetricarboxylic acid, 4‐4′‐bipyridine] is fabricated through a one‐step solvothermal method. The {001} crystal plane is exposed to the largest hexagonal surface, which is an ideal structure for electron transport and ion diffusion. Compared with the surrounding rectangular crystal surface, the ion diffusion length through the {001} crystal plane is the shortest. In addition, the cross‐linked porous mesh structures growing on the {001} crystal plane strengthen the mixing with conductive carbon, inducing preferable conductivity, as well as increasing the area of ion contact and the number of active sites. These advantages enable the hexagonal Ni‐MOF to exhibit excellent electrochemical performance as supercapacitor electrode materials. In a three‐electrode cell, specific capacitance of hexagonal Ni‐MOF in the 3.0 m KOH electrolyte is 977.04 F g−1 and remains at the initial value of 92.34% after 5,000 cycles. When the hexagonal Ni‐MOF and activated carbon are assembled into aqueous devices, the electrochemical performance remains effective.

No abstract