An effective method for depositing highly transparent and conductive ultrathin silver (Ag) electrodes using minimal oxidation is reported. The minimal oxidation of Ag layers significantly improves the intrinsic optical and structural properties of Ag without any degradation of its electrical conductivity. Oxygen‐doped Ag (AgOx) layers of thicknesses as low as 6 nm exhibit completely 2D and continuous morphologies on ZnO films, smaller optical reflections and absorbances, and smaller sheet resistances compared with those of discontinuous and granular‐type Ag layers of the same thickness. A ZnO/AgOx/ZnO (ZAOZ) electrode using an AgOx (O/Ag = 3.4 at%) layer deposited on polyethylene terephthalate substrates at room temperature shows an average transmittance of 91%, with a maximum transmittance of 95%, over spectral range 400−1000 nm and a sheet resistance of 20 Ω sq−1. The average transmittance value is increased by about 18% on replacing a conventional ZnO/Ag/ZnO (ZAZ) electrode with the ZAOZ electrode. The ZAOZ electrode is a promising bottom transparent conducting electrode for highly flexible inverted organic solar cells (IOSCs), and it achieves a power conversion efficiency (PCE) of 6.34%, whereas an IOSC using the ZAZ electrode exhibits a much lower PCE of 5.65%.

The work function and surface property of ZnO can be simply tuned by the self-assembled monolayer (SAM) molecules derived from benzoic acid such as 4-methoxybenzoic acid (MBA), 4-tert-butylbenzoic acid (BBA), and 4-fluorobenzoic acid (FBA), which have different dipole orientation and magnitude. MBA, BBA, and FBA treated ZnO layers were used as an electron injection/transporting layer for inverted type polymer solar cells (PSCs) with a structure of ITO/SAM treated ZnO/active layer (P3HT:PC61BM)/MoO3/Ag. The power conversion efficiency (PCE) of PSCs based on MBA and BBA treated ZnO reaches 3.34 and 2.94%, respectively, while the PCE of the device based on untreated ZnO is 2.47%. In contrary, the PCE of the device with FBA treated ZnO is 1.81%. The open circuit voltage (V oc) of the device with MBA, BBA, and FBA treated ZnO is 0.63 and 0.62 V, respectively, while the V oc of PSC with untreated ZnO is 0.60 V. Contrarily, the V oc of the device with FBA treated ZnO is 0.53 V. The PCE and V oc of PSCs based on MBA and BBA treated ZnO are better than those of the other devices. This seems to be related with the direction of dipole moment of benzoic acid derivatives. Also, the morphology of the active layer seems to be affected by the substituent on the 4-position of benzoic acid. The active layer on MBA treated ZnO shows optimized morphology, and its device shows the best performances. We demonstrate that the work function and morphology of the active layer can be controlled by SAM treatment of the ZnO surface with different dipole orientation and a substituent on the 4-position of benzoic acid. These are very simple and effective methods for improving the performances of PSCs. The results provide an alternative strategy to improve the interface property between inorganic and organic materials in organic electronic devices.

High efficiency and flexible inverted organic solar cells have been fabricated using solution-processed silver nanowire/zinc oxide composite transparent electrodes. The transparent electrodes showed a low sheet resistance of ~13 Ω·sq -1 and high transmittance of ~93% as well as superior mechanical flexibility. Power conversion efficiencies of ~7.57% and ~7.21% were achieved for devices fabricated on glass and plastic substrate, respectively. Moreover, the flexible devices did not show any degradation in their performance even after being folded with a radius of ~480 μm.

We report that significantly more transparent yet comparably conductive AgOx films, when compared to Ag films, are synthesized by the inclusion of a remarkably small amount of oxygen (i.e., 2 or 3 atom %) in thin Ag films. An 8 nm thick AgOx (O/Ag=2.4 atom %) film embedded between 30 nm thick ITO films (ITO/AgOx/ITO) achieves a transmittance improvement of 30% when compared to a conventional ITO/Ag/ITO electrode with the same configuration by retaining the sheet resistance in the range of 10-20 Ω sq(-1). The high transmittance provides an excellent opportunity to improve the power-conversion efficiency of organic solar cells (OSCs) by successfully matching the transmittance spectral range of the electrode to the optimal absorption region of low band gap photoactive polymers, which is highly limited in OSCs utilizing conventional ITO/Ag/ITO electrodes. An improvement of the power-conversion efficiency from 4.72 to 5.88% is achieved from highly flexible organic solar cells (OSCs) fabricated on poly(ethylene terephthalate) polymer substrates by replacing the conventional ITO/Ag/ITO electrode with the ITO/AgOx/ITO electrode. This novel transparent electrode can facilitate a cost-effective, high-throughput, room-temperature fabrication solution for producing large-area flexible OSCs on heat-sensitive polymer substrates with excellent power-conversion efficiencies.

Stretchable organic light-emitting diodes are ubiquitous in the rapidly developing wearable display technology. However, low efficiency and poor mechanical stability inhibit their commercial applications owing to the restrictions generated by strain. Here, we demonstrate the exceptional performance of a transparent (molybdenum-trioxide/gold/molybdenum-trioxide) electrode for buckled, twistable, and geometrically stretchable organic light-emitting diodes under 2-dimensional random area strain with invariant color coordinates. The devices are fabricated on a thin optical-adhesive/elastomer with a small mechanical bending strain and water-proofed by optical-adhesive encapsulation in a sandwiched structure. The heat dissipation mechanism of the thin optical-adhesive substrate, thin elastomer-based devices or silicon dioxide nanoparticles reduces triplet-triplet annihilation, providing consistent performance at high exciton density, compared with thick elastomer and a glass substrate. The performance is enhanced by the nanoparticles in the optical-adhesive for light out-coupling and improved heat dissipation. A high current efficiency of ~82.4 cd/A and an external quantum efficiency of ~22.3% are achieved with minimum efficiency roll-off.