Nature has developed materials, objects, and processes that function from the macroscale to the nanoscale. The emerging field of biomimetics allows one to mimic biology or nature to develop nanomaterials, nanodevices, and processes which provide desirable properties. Hierarchical structures with dimensions of features ranging from the macroscale to the nanoscale are extremely common in nature to provide properties of interest. There are a large number of objects including bacteria, plants, land and aquatic animals, and seashells with properties of commercial interest. Certain plant leaves, such as Lotus leaves, are known to be superhydrophobic and self-cleaning due to the hierarchical roughness of their leaf surfaces. The self-cleaning phenomenon is widely known as the "Lotus effect." These surfaces with high contact angle and low contact angle hysteresis with a self-cleaning effect also exhibit low adhesion and drag reduction for fluid flow. In this thesis, the theoretical mechanisms of the wetting of rough surfaces are presented followed by the characterization of natural leaf surfaces. The next logical step is to realize superhydrophobic surfaces based on understanding of the leaves. Next, a comprehensive review is presented on artificial superhydrophobic surfaces fabricated using various fabrication techniques and the influence of micro-, nano-and hierarchical structures on superhydrophobicity, self-cleaning, low adhesion, and drag reduction. An aquatic animal, such as a shark, is another model from nature for the reduction of drag in iii fluid flow. The artificial surfaces from the shark skin have been created, and the influence of structure on drag reduction efficiency is discussed. Furthermore, oleophobic surfaces can be used as a biomimetic coating that prevents contamination of the underwater parts of ships by biological and organic contaminants, including oil. The thesis discusses the wetting behavior of oil droplets on various superoleophobic surfaces. iv DEDICATION Dedicated to my parents, my wife, and my lovely daughters v ACKNOWLEDGMENTS The work presented in this dissertation would not have been possible without the support of many people. I would like to first thank my advisor, Professor Bharat Bhushan who was abundantly helpful and offered invaluable assistance, support and guidance. I will always remember the time spent with him. I would like also to extend my sincere appreciation for my doctoral committee members: Professor J. William Rich, Professor
Superhydrophobic surfaces exhibit extreme water-repellent properties. These surfaces with high contact angle and low contact angle hysteresis also exhibit a self-cleaning effect and low drag for fluid flow. Certain plant leaves, such as lotus leaves, are known to be superhydrophobic and self-cleaning due to the hierarchical roughness of their leaf surfaces. The self-cleaning phenomenon is widely known as the 'lotus effect'. Superhydrophobic and self-cleaning surfaces can be produced by using roughness combined with hydrophobic coatings. In this paper, the effect of micro-and nanopatterned polymers on hydrophobicity is reviewed. Silicon surfaces patterned with pillars and deposited with a hydrophobic coating were studied to demonstrate how the effects of pitch value, droplet size and impact velocity influence the transition from a composite state to a wetted state. In order to fabricate hierarchical structures, a low-cost and flexible technique that involves replication of microstructures and self-assembly of hydrophobic waxes is described. The influence of micro-, nano-and hierarchical structures on superhydrophobicity is discussed by the investigation of static contact angle, contact angle hysteresis, droplet evaporation and propensity for air pocket formation. In addition, their influence on adhesive force as well as efficiency of selfcleaning is discussed.
Summary: Electro‐active shape‐memory composites were synthesized using conducting polyurethane (PU) composites and multi‐walled carbon nanotubes (MWNTs). Surface modification of the MWNTs (by acid treatment) improved the mechanical properties of the composites. The modulus and stress at 100% elongation increased with increasing surface‐modified MWNT content, while elongation at break decreased. MWNT surface modification also resulted in a decrease in the electrical conductivity of the composites, however, as the surface modified MWNT content increased the conductivity increased (an order of 10−3 S · cm−1 was obtained in samples with 5 wt.‐% modified‐MWNT content). Electro‐active shape recovery was observed for the surface‐modified MWNT composites with an energy conversion efficiency of 10.4%. Hence, PU‐MWNT composites may prove promising candidates for use as smart actuators.
Biomimetics, mimicking nature for engineering solutions, provides a model for the development of superhydrophobic/superoleophobic and self-cleaning surfaces. A number of biomimetic superhydrophobic surfaces have been developed by using a hydrophobic coating, surface roughness, and the ability to form air pockets between solid and water. Oleophobic surfaces that have the potential for self-cleaning and antifouling from biological and organic contaminants in both air and water need to be studied. The surface tension of oil and organic liquids is lower than that of water, so to create a superoleophobic surface, the surface energy of the solid surface in air should be lower than that of oil. The wetting behavior of water and oil droplets for hydrophobic/philic and oleophobic/philic surfaces in three-phase interfaces was studied. In order to make the surface oleophobic at a solid-air-oil interface, a material with a surface energy lower than that of oil was used. In underwater applications, the oleophobicity/philicity of an oil droplet in water was studied on the surfaces with different surface energies of various interfaces and contact angles of water and oil droplets in air. A model for predicting the contact angles of water and oil droplets was proposed. To validate the model, the wetting behavior of flat and micropatterned surfaces with varying pitch values were studied. Furthermore, the wetting behavior of the nano- and hierarchical structures found in Lotus plant surfaces and the shark skin replica as an example of aquatic animal were also studied. On the basis of the experimental data and the model, the trends were explained.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.