The effect of grain size on creep properties of type 316LN stainless steel has been investigated at 600 o C under different stresses. The initial strain at the beginning of creep tests decreased with the decrease of grain size. This was confirmed by the Hall-Petch relationship. The steady state creep rate decreased to a minimum value at the intermediate grain size (dm=80~130 μm) and then increased with the further increase of grain size. This result agreed with Garofalo's model stating that grain boundaries act simultaneously as both dislocation sources and barriers to dislocation movement. The rupture elongation at the intermediate grain size was minimal due to the cavity formed easily by carbide precipitates in the grain boundaries.
The effect of alloying elements and microstructure on the dynamic strain aging (DSA) behavior of 1.25Cr-0.5Mo (P11, ASTM 335Gr.P11) and 2.25Cr-1Mo (P22, ASTM 335Gr.P22) steels was investigated. For both steels, different cooling conditions such as air-cooling (AC) and oil-quenching (OQ) were applied. Tensile tests were conducted in the temperature range of 20-450 ℃ and a strain rate in the range of 6 × 10<sup>-5</sup>- 6 × 10<sup>-3</sup> s<sup>-1</sup> for the steels with different cooling conditions. The P11AC steel showed serration behavior over a wider temperature range and exhibited higher ultimate tensile strength (UTS) than for the P22AC steel. This is attributed to the effects of alloying elements (Cr, Mo and Si) due to dissolved C, and the ferrite fraction on mechanical behavior. Meanwhile, the P11AC and P11OQ steels also showed different behaviors for DSA starting temperature, DSA temperature range, and serration type. The AC condition showed higher UTS from the interaction solid solution hardening (ISSH) effect due to substitutional Cr, Mo, and interstitial C elements. The calculated activation energy value (Q) for the P11 steel was around 94-103 kJ/mol<sup>-1</sup>, similar to that of ferritic steels, and it was higher for the P22 steel, with a Q value of 233 kJ/mol<sup>-1</sup> from the ISSH effect.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.