No abstract

The application of scanning electron microscopy (SEM) and secondary ion mass spectrometry (SIMS) for characterization of mixed plutonium and uranium particles from nuclear weapons material is presented. The particles originated from the so-called Thule accident in Greenland in 1968. Morphological properties have been studied by SEM and two groups were identified: a "popcorn" structure and a spongy structure. The same technique, coupled with an energy-dispersive X-ray (EDX) spectrometer, showed a heterogeneous composition of Pu and U in the surface layers of the particles. The SIMS depth profiles revealed a varying isotopic composition indicating a heterogeneous mixture of Pu and U in the original nuclear weapons material itself. The depth distributions agree with synchrotron-radiation-based mu-XRF (X-ray fluorescence microprobe) measurements on the particle (Eriksson, M., Wegryzynek, D., Simon, R., & Chinea-Cano, E., in prep.) when a SIMS relative sensitivity factor for Pu to U of 6 is assumed. Different SIMS identified isotopic ratio groups are presented, and the influence of interferences in the Pu and U mass range are estimated. The study found that the materials are a mixture of highly enriched 235U (235U:238U ratio from 0.96 to 1.4) and so-called weapons grade Pu (240Pu:239Pu ratio from 0.028 to 0.059) and confirms earlier work reported in the literature.

No abstract

In order to prevent nuclear proliferation, the isotopic analysis of uranium and plutonium microparticles has strengthened the means in international safeguards for detecting undeclared nuclear activities. In order to ensure accuracy and precision in the analytical methodologies used, the instrumental techniques need to be calibrated. The objective of this study was to produce and characterize particles consisting of U, Pu, and mixed U-Pu, suitable for such reliability verifications. A TSI vibrating orifice aerosol generator in connection with a furnace system was used to produce micrometer sized, monodispersed particles from reference U and Pu materials in solution. The particle masses (in the range of 3-6 pg) and sizes (approximately 1.5 microm) were controlled by the experimental conditions and the parameters for the aerosol generator. Size distributions were obtained from scanning electron microscopy, and energy-dispersive X-ray analysis confirmed that the particle composition agreed with the starting material used. A secondary ion mass spectrometer (SIMS) was used to characterize the isotopic composition of the particles. Isobaric and polyatomic interference in the SIMS spectra was identified. In order to obtain accurate estimates of the interference, a batch of Pu particles were produced of mainly (242)Pu. These were used for SIMS analysis to characterize the relative ionization of Pu and U hydride ions and to determine the SIMS useful yields of U and Pu. It was found that U had a higher propensity to form the hydride than Pu. Useful yields were determined at a mass resolution of 450 for U-Pu particles: (1.71 +/- 0.15) % for Pu and (0.72 +/- 0.06) % for U. For Pu particles: (1.65 +/- 0.14) % for Pu. This gave a relative sensitivity factor between U and Pu (RSF(U:Pu)) of 2.4 +/- 0.2. However, the RSF(U:Pu) showed large fluctuations during the sputtering time for each analyses of the mixed U-Pu particles, in the range of 1.9-3.4.

No abstract

Abstract−A considerable fraction of radioactivity entering the environment from different nuclear events is associated with particles. The impact of these events can only be fully assessed where there is some knowledge about the mobility of particle bound radionuclides entering the environment. The behavior of particulate radionuclides is dependent on several factors, including the physical, chemical and redox state of the environment, the characteristics of the particles (e.g., the chemical composition, crystallinity and particle size) and on the oxidative state of radionuclides contained in the particles. Six plutonium-containing particles stemming from Runit Island soil (Marshall Islands) were characterized using non-destructive analytical and microanalytical methods. By determining the activity of 239,240 Pu and 241 Am isotopes from their gamma peaks structural information related to Pu matrix was obtained, and the source term was revealed. Composition and elemental distribution in the particles were studied with synchrotron radiation based micro X-ray fluorescence (SR-µ-XRF) spectrometry. Scanning electron microscope equipped with energy dispersive X-ray detector (SEM-EDX) and secondary ion mass spectrometer (SIMS) were used to examine particle surfaces. Based on the elemental composition the particles were divided into two groups; particles with plain Pu matrix, and particles where the plutonium is included in Si/O-rich matrix being more heterogenously distributed. All of the particles were identified as fragments of initial weapons material. As containing plutonium with low 240 Pu/ 239 Pu atomic ratio, ~2-6 %, which corresponds to weapons grade plutonium, the source term was identified to be among the safety tests conducted in the history of Runit Island. IntroductionFrom 1946 through 1958 the United States conducted a total of 65 atmospheric nuclear weapons tests on Bikini and Enewetak Atolls within the Republic of the Marshall Islands [UNSCEAR 2000;Hamilton, 2004]. The nuclear test program included air drops (4), barge detonations (35), tower detonations (13), surface detonations (10), and underwater detonations (3). The total yield for all tests conducted on Bikini and Enewetak Atolls was 109 Mt with an estimated fission yield of 53 % [UNSCEAR, 2000;Hamilton 2004]. At Bikini, the total yield was approximately 76.8 Mt with a fission yield of approximately 55 %. At Enewetak, the total and fission yields were 30.2 Mt and 49%, respectively [UNSCEAR, 2000]. A surface safety test and one additional unsuccessful detonation at Enewetak Atoll resulted in little of no fission yield [DOE, 2000].The nuclear test program in the Marshall Islands produced both global and localized forms of fallout contamination. The terrestrial and marine environments of each atoll are contaminated with a range of fission and activation products, and unfissioned nuclear materials [Hamilton, 2004] In general, a considerable fraction of radioactivity entering the environment from nuclear events such as nuclear weapons accidents, auth...

No abstract

No abstract