This paper presents an integrated approach to landslide research based on remote sensing and sensor networks. This approach is composed of three important parts: (i) landslide susceptibility mapping using remote-sensing techniques for susceptible determination of landslide spots; (ii) scaled-down landslide simulation experiments for validation of sensor network for landslide monitoring, and (iii) in situ sensor network deployment for intensified landslide monitoring. The study site is the Taziping landslide located in Hongkou Town (Sichuan, China). The landslide features generated by landslides triggered by the 2008 Wenchuan Earthquake were first extracted by means of object-oriented methods from the remote-sensing images before and after the landslides events. On the basis of correlations derived between spatial distribution of landslides and control factors, the landslide susceptibility mapping was carried out using the Artificial Neural Network (ANN) technique. Then the Taziping landslide, located in the above mentioned study area, was taken as an example to design and implement a scaled-down landslide simulation platform in Tongji University (Shanghai, China). The landslide OPEN ACCESSRemote Sens. 2013, 5 4320 monitoring sensors were carefully investigated and deployed for rainfall induced landslide simulation experiments. Finally, outcomes from the simulation experiments were adopted and employed to design the future in situ sensor network in Taziping landslide site where the sensor deployment is being implemented.

Rainfall-induced landslides are a major threat in the hilly and gully regions of the Loess Plateau. Landslide mapping via field investigations is challenging and impractical in this complex region because of its numerous gullies. In this paper, an algorithm based on an object-oriented method (OOA) has been developed to recognize loess landslides by combining spectral, textural, and morphometric information with auxiliary topographic parameters based on high-resolution multispectral satellite data (GF-1, 2 m) and a high-precision DEM (5 m). The quality percentage (QP) values were all greater than 0.80, and the kappa indices were all higher than 0.85, indicating good landslide detection with the proposed approach. We quantitatively analyze the spectral, textural, morphometric, and topographic properties of loess landslides. The normalized difference vegetation index (NDVI) is useful for discriminating landslides from vegetation cover and water areas. Morphometric parameters, such as elongation and roundness, can potentially improve the recognition capacity and facilitate the identification of roads. The combination of spectral properties in near-infrared regions, the textural variance from a grey level co-occurrence matrix (GLCM), and topographic elevation data can be used to effectively discriminate terraces and buildings. Furthermore, loess flows are separated from landslides based on topographic position data. This approach shows great potential for quickly producing accurate results for loess landslides that are induced by extreme rainfall events in the hilly and gully regions of the Loess Plateau, which will help decision makers improve landslide risk assessment, reduce the risk from landslide hazards and facilitate the application of more reliable disaster management strategies.

No abstract

No abstract

Using LiCl/LiBr, Selectfluor-promoted chlorination/bromination of 2-aminopyridines and 2-aminodiazines is established, producing the corresponding products with high regioselectivity.

No abstract

ABSTRACT. We present results of a regional comparative study of surface mass changes from 2004 to 2008 based on Gravity Recovery and Climate Experiment (GRACE), The Ice, Cloud and Land Elevation Satellite (ICESat) and CHINARE observations over the Lambert Glacier/Amery Ice Shelf system (LAS). Estimation of the ICESat mass change rates benefitted from the density measurements along the CHINARE traverse and a spatial density adjustment method for reducing the effect of spatial density variations. In the high-elevation inland region, a positive trend was estimated from both ICESat and GRACE data, which is in line with the CHINARE accumulation measurements. In the coastal region, there were areas with high level accumulations in both ICESat and GRACE trend maps. In many high flow-speed glacier areas, negative mass change rates may be caused by dynamic ice flow discharges that have surpassed the snow accumulation. Overall, the mass change rate estimate

Recently, various novel scenarios have been studied for indoor localization. The trilateration is known as a classic theoretical model of geometric-based indoor localization, with uniform RSSI data that can be transferred directly into distance ranges. Then, a trilateration solution can be algebraically acquired from theses ranges, in order to fix user’s actual location. However, the collected RSSI or other measurement data should be further processed and classified to lower the localization error rate, instead of using the raw data influenced by multi-path effect, multiple nonlinear interference and noises. In this survey, a large number of existing techniques are presented for different indoor network structures and channel conditions, divided as LOS (light-of-sight) and NLOS (non light-of-sight). Besides, the input measurement data such as RSSI (received signal strength indication), TDOA (time difference of arrival), DOA (distance of arrival), and RTT (round trip time) are studied towards different application scenarios. The key localization techniques like RSSI-based fingerprinting technique are presented using supervised machine learning methods, namely SVM (support vector machine), KNN (K nearest neighbors) and NN (neural network) methods, especially in an offline training phase. Other unsupervised methods as isolation forest, k-means, and expectation maximization methods are utilized to further improve the localization accuracy in online testing phase. For Bayesian filtering methods, apart from the basic linear Kalman filter (LKF) methods, nonlinear stochastic filters such as extended KF, cubature KF, unscented KF and particle filters are introduced. These nonlinear methods are more suitable for dynamic localization models. In addition to the localization accuracy, the other important performance features and evaluation aspects are presented in our paper: scalability, stability, reliability, and the complexity of proposed algorithms is compared in this survey. Our paper provides a comprehensive perspective to compare the existing techniques and related practical localization models, with the aim of improving localization accuracy and reducing the complexity of the system.