No abstract

No abstract

No abstract

No abstract

Visible Light Communication (VLC) technology is an emerging technology using visible light modulation that, in the modern world, will mainly facilitate high-speed internet connectivity. VLC provides tremendous advantages compared to conventional radio frequency, such as a higher transmission rate, high bandwidth, low-power consumption, no health hazards, less interference, etc., which make it more prominent in recent days. Due to their outstanding features, including low cost, low power consumption, etc., µ-light-emitting diodes (LEDs) have gained considerable attention for VLC implementation, but mostly for the ability to be used for lighting as well as communications. In this review paper, we will focus mainly on recent developments in VLC applications and various factors affecting the modulation bandwidth of VLC devices. Numerous factors, such as quantum confined stark effect (QCSE), carrier lifetime, carrier recombination time, crystal orientation, etc. affect the modulation bandwidth of LEDs, and more information will be discussed in the following sections. This paper will focus on VLC applications based on LEDs but mainly on semipolar μ-LEDs and μ-LED-based arrays with high bandwidths. Another important application of VLC is underwater optical wireless communication (UOWC), which has drawn a huge interest in marine exploration and underwater connectivity, but still faces some challenges because visible light is being used. In addition, this paper will focus on how the current VLC system modulation bandwidth can be enhanced. Many methods have been introduced, such as decreasing the active layer thickness or effective active area or using doping, but the bandwidth is restricted by the recombination time when the system configuration reaches its limit. Therefore, it is important to find alternative ways such as optimizing the system, using the blue filter or using the equalization technology, which will be addressed later. Overall, this review paper provides a brief overview of the VLC-based system performance and some of its potential prospects.

In terms of their use in displays, quantum dots (QDs) exhibit several advantages, including high illumination efficiency and color rendering, low-cost, and capacity for mass production. Furthermore, they are environmentally friendly. Excellent luminescence and charge transport properties of QDs led to their application in QD-based light-emitting diodes (LEDs), which have attracted considerable attention in display and solid-state lighting applications. In this review, we discuss the applications of QDs which are used on color conversion filter that exhibit high efficiency in white LEDs, full-color micro-LED devices, and liquid-type structure devices, among others. Furthermore, we discuss different QD printing processes and coating methods to achieve the full-color micro-LED. With the rise in popularity of wearable and see-through red, green, and blue (RGB) full-color displays, the flexible substrate is considered as a good potential candidate. The anisotropic conductive film method provides a small controllable linewidth of electrically conductive particles. Finally, we discuss the advanced application for flexible full-color and highly efficient QD micro-LEDs. The general conclusion of this study also involves the demand for a more straightforward QD deposition technique, whose breakthrough is expected.

The percentage of glycosylated hemoglobin A1c (%GHbA1c) in human whole blood indicates the average plasma glucose concentration over a prolonged period of time and is used to diagnose diabetes. However, detecting GHbA1c in the whole blood using immunoassays has limited detection sensitivity due to its low percentage in total hemoglobin (tHb) and interference from various glycan moieties in the sample. We have developed a sandwich immunoassay using an antibody microarray on a polydimethylsiloxane (PDMS) substrate modified with fluorinated compounds to detect tHb and glycosylated hemoglobin A1c (GHbA1c) in human whole blood without sample pretreatment. A polyclonal antibody against hemoglobin (Hb) immobilized on PDMS is used as a common capture probe to enrich all forms of Hb followed by detection via monoclonal anti-Hb and specific monoclonal anti-GHbA1c antibodies for tHb and GHbA1c detection, respectively. This method prevents the use of glycan binding molecules and dramatically reduces the background interference, yielding a detection limit of 3.58 ng/mL for tHb and 0.20 ng/mL for GHbA1c. The fluorinated modification on PDMS is superior to the glass substrate and eliminates the need for the blocking step which is required in commercial enzyme linked immunosorbent assay (ELISA) kits. Moreover, the detection sensitivity for GHbA1c is 4-5 orders of magnitude higher, but the required sample amount is 25 times less than the commercial method. On the basis of patient sample data, a good linear correlation between %GHbA1c values determined by our method and the certified high performance liquid chromatography (HPLC) standard method is shown with R(2) > 0.98, indicating the great promise of the developed method for clinical applications.

No abstract