This paper presents a new graphical method for selecting a pair of optical glasses to simultaneously achromatize and athermalize an imaging lens made of materials in contact. An athermal glass map that plots thermal glass constant versus inverse Abbe number is derived through analysis of optical glasses and plastic materials in visible light. By introducing the equivalent Abbe number and equivalent thermal glass constant, although it is a multi-lens system, we have a simple way to visually identify possible optical materials. Applying this method to design a phone camera lens equipped with quarter inch image sensor having 8-mega pixels, the thermal defocuses over -20°C to +60°C are reduced to be much less than the depth of focus of the system.
This paper presents a new graphical method for selecting a pair of optical glass and housing materials to simultaneously achromatize and athermalize a multilens system composed of many elements. To take into account the lens spacing and housing, we quantify the lens power, chromatic power, and thermal power by weighting the ratio of the paraxial ray height at each lens to them. In addition, we introduce the equivalent single lens and the expanded athermal glass map including a housing material. Even though a lens system is composed of many elements, we can simply identify a pair of glass and housing materials that satisfies the athermal and achromatic conditions. Applying this method to design a black box camera lens equipped with a 1/4-inch image sensor having a pixel width of 2 µm, the chromatic and thermal defocusings are reduced to less than the depth of focus, over the specified ranges in temperature and frequency.
When glycosaminoglycan (GAG)-degrading enzymes were measured in normal human stool suspensions, all 5 tested different stools degraded titrable heparin and acharan sulfate. GAG-degrading bacteria were screened from the isolates of human stools. Among them, HJ-15 had the most potent activities of heparinases (GAGs-degrading enzymes). However, HJ-15 produced the enzyme even if in the media without heparin. Acharan sulfate lyase was induced by acharan sulfate and heparin. Heparinase production was also induced by these GAGs. These enzymes, acharan sulfate lyase and heparinase, were produced in exponential and stationary phase of HJ-15 growth, respectively. Optimal pHs of the acharan sulfate lyase and heparinase activities were 7.2 and 7.5, respectively. The biochemical properties of HJ-15 was similar to those of B. stercoris. However, difference from B. stercoris was utilization of raffinose. This HJ-15 also degraded chondroitin sulfates A and C.
This paper presents a design method for improving the low relative illumination and large distortion due to widening the field of a system. A tele-centric optical system in image space was suggested to increase the relative illumination. Through the analyses of the third-order aberrations affected by introducing aspherical surfaces, we have proposed a method to determine analytically what surface should be aspheric to correct each aberration effectively. By utilizing this method to design a wide field lens, a tele-centric wide field lens with f-number of F/2.0 was obtained. Even though the field angle is 120 degrees, it has a very low distortion less than -2% and high relative illumination more than 73.7%. In conclusion, this analytic method for selecting aspherical surfaces is expected to serve as a useful way to find design solutions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.