A new type of physically cross-linked solid polymer electrolyte was demonstrated by using a poly(vinylidene fluoride) (PVDF) homopolymer in a room-temperature ionic liquid. The physical origins of gelation, specific capacitance, ionic conductivity, mechanical property, and capacitive charge modulation in organic thin-film electrochemical transistors were investigated systematically. Gelation occurs through bridging phase-separated homopolymer crystals by polymer chains in the composite electrolyte, thereby forming a rubbery network. The resulting homopolymer ion gels are able to accommodate both outstanding electrical (ionically conductive and capacitive) and mechanical (flexible and free-standing) characteristics of the component ionic liquid and the structuring polymer, respectively. These ion gels were successfully applied to organic thin-film transistors as high-capacitance gate dielectrics. Therefore, these results provide an effective route to generate a highly conductive rubbery polymer electrolyte that can be used in widespread electronic and electrochemical devices.

Nowadays, there has been an increasing demand to develop low-cost, disposable or reusable display devices to meet and maximize short-term user convenience. However, the disposable device has unfortunately not materialized yet due to the light-emitting materials and fabrication process issues. Here, we report sticker-type electrochemiluminescent (ECL) device using self-supporting, light-emitting gel electrolytes. The self-supporting ion gels were formulated by mixing a network-forming polymer, ionic liquid, and metal complex luminophore. The resulting ion gels exhibit excellent mechanical strength to form free-standing rubbery light-emitting electrolyte films, which enables the fabrication of sticker-type display by simple transfer and lamination processes on various substrates. The sticker-type ECL devices can be operated under an AC bias and exhibit a low operating voltage of 4 V (peak-to-peak voltage) with a maximum luminance of 90 cd/m2. It is notable that the result is the first work to realize sticker displays based on electrochemical light emitting devices and can open up new possibilities for flexible or disposal display.

Single-walled carbon nanotube (SWCNT)-based hybrid electrodes are promising for fully-printed stretchable thin-film transistors and inverters.