Deficit irrigation water (DW) is one of the main stress factors that negatively affect cotton cultivation. Hence, the identification of cotton cultivars tolerant to DW and sandy soil conditions is particularly needed. Understanding the response of cultivars to DW is essential for estimating water needs. Besides, by understanding the physiological and antioxidant status, reflecting distinct growth, yield, and fiber quality traits under DW, the cultivar tolerant to DW can be identified in the early stage of plant growth. Therefore, two cotton cultivars (Giza 86 and Giza 92, selected for their suitability to the climatic conditions of the study area) were evaluated in this study under two DW regimes (80% or 60% of crop evapotranspiration; ETc) vs. complete irrigation water (CW; 100% of ETc as a control). These regimes amounted to 1228 or 922 vs. 1536 mm season−1, respectively, for field trials conducted during the 2019 and 2020 summer seasons. DW (80% or 60% of ETc) significantly decreased relative water content, membrane stability index, chlorophyll content, plant height, yield components, and fiber quality traits. Otherwise, phenolic compounds, proline contents, as well as antioxidant enzyme activities increased in concomitance with an increase in electrolyte leakage and malondialdehyde content. The harmful effects of the higher DW (60% of ETc) were more pronounced in both cultivars. However, compared to Giza 86, Giza 92 showed higher performance under both CW and DW regimes, accounting for higher values for all studied traits in the blooming stage. The correlation coefficient showed that most of the physiological traits and antioxidants under study were effective criteria in identifying a high-yielding cultivar under DW in the cotton blooming stage and therefore can be used to select the cotton cultivar more suitable for the conditions of the study area. Biplot analysis was used to study the relationship between DW and all evaluated traits, as it was found that the most prominent traits were elongation (%) with Giza 92 + 100% ETc, yellowness degree with Giza 86 + 100% ETc, and SOD with Giza 92 + 60% ETc.

Drought is a major abiotic stress that greatly affects canola growth, production, and quality. Moreover, water scarcity is projected to be more severe and frequent as a result of climate change, in particular in arid environments. Thereupon, developing drought-tolerant and high-yielding canola genotypes has become more critical to sustaining its production and ensuring global food security with the continuing population growth. In the present study, ten canola genotypes comprising six developed tissue-cultured canola genotypes, two exotic genotypes, and two commercial cultivars were evaluated under four irrigation regimes. The applied irrigation regimes were well-watered (100% crop evapotranspiration, ETc), mild drought (80% ETc), moderate drought (60% ETc), and severe drought (40% ETc) conditions. Drought-stress treatments (80, 60, and 40% ETc) gradually reduced the chlorophyll content, relative water content, flowering time, days to maturity, plant height, number of pods, number of branches, seed yield, and oil percentage, and increased proline, phenolic, anthocyanin, and glycine betaine contents. The evaluated genotypes exhibited varied responses to drought-stress conditions. The developed tissue-cultured genotypes T2, T3, and T1, as well as exotic genotype Torpe, possessed the highest performance in all evaluated parameters and surpassed the other tested genotypes under water-deficit conditions. Overall, our findings elicited the superiority of certain newly developed tissue-cultured genotypes and exotic ones compared with commercial cultivars, which could be exploited in canola breeding under water-deficit conditions.

Lentil is one of the essential legume crops, which provides protein for humans and animals. This legume can improve soil fertility through nitrogen fixation, which is imperative in low-fertility soils. The growth and productivity of lentil could be enhanced through improving nutrition and root revitalization. Therefore, the objective of this study was to assess the impact of root activator (RA) and phosphorus (P) application on morphological, physiological, agronomic, and quality traits of lentil under newly reclaimed low-fertility sandy soil in an arid environment. The RA was applied at four levels of 0 (RA0-untreated control), 1.25 (RA1), 2.5 (RA2), and 3.75 (RA3) l ha–1. RA contained 9% potassium humate, 1,600 ppm indole butyric acid, 200 ppm gibberellic acid, and 200 ppm naphthalene acetic acid. The recommended rate of phosphorus (P) fertilization in the newly reclaimed low-fertility sandy soil (75 kg P2O5 ha–1) was applied, and its amount was increased and decreased by 25 kg P2O5 ha–1 vs. non-added control. Thus, P rates were applied at four rates 0 (P0; control), 50 (P1), 75 (P2), and 100 (P3) kg phosphorus pentoxide (P2O5) ha–1. Our results revealed that treated lentil plants with the high levels of both treatments (RA3 and P3) exhibited superiority in root measurements (root length, total number of nodules plant−1, number of active nodules plant−1, dry weights of active nodules, and total root), nitrogenase activity, chlorophyll a and b, carotenoids, yield traits, and seed proteins and carbohydrates. However, the recommended P level (75 kg P2O5 ha–1, P2) under the high level of RA (3.75 l ha–1, RA3) displayed non-significant differences in yield traits (plant height, 1,000-seed weight, seed yield ha–1) and quality traits (protein and carbohydrate) with the high P level (100 kg P2O5 ha–1, P3). Accordingly, its recommended economically and environmentally to use this coapplication of RA3 and P3 in low-fertility soil for better lentil growth, and seed yield and quality.

Calcium is one of the most limiting factors for the growth and reproduction of peanut, which ultimately affects pod and seed yields. A two-year field experiment was carried out to assess the impact of five calcium applications, including nano-calcium and conventional forms, on growth, leaf nutrient content, yield traits, and quality parameters of three diverse peanut cultivars (Ismailia-1, Giza-5, and Giza-6). The applied calcium applications were calcium sulfate, which is recommended for commercial peanut cultivation and commonly referred to as gypsum (coded as Ca-1), calcium nitrate (Ca-2), nano-calcium nitrate (Ca-3), 50% calcium nitrate + 50% nano-calcium (Ca-4), and 50% calcium sulfate + 50% nano-calcium (Ca-5). Calcium sulfate (gypsum, Ca-1) was soil-supplied during the seedbed preparation as recommended, while the other calcium applications (Ca-2, Ca-3, Ca-4, and Ca-5) were exogenously sprayed three times at 30, 45, and 60 days after sowing. The soil of the experimental site was alkaline, with a high pH of 8.6. The results revealed significant differences among cultivars, calcium applications, and their interactions. The soil-supplied gypsum Ca-1 displayed lower agronomic performance on all recorded growth, leaf nutrient content, yield traits, and quality parameters. On the other hand, the foliar-supplied calcium, particularly Ca-4 and Ca-5, displayed superior effects compared to the other simple calcium forms. Ca-4 and Ca-5 produced significantly higher seed yield (3.58 and 3.38 t/ha) than the simple recommended form (Ca-1, 2.34 t/ha). This could be due to the difficulty of calcium uptake from soil-supplied calcium under high soil pH compared to the exogenously sprayed nano-calcium form. Moreover, the superior performance of Ca-4 and Ca-5 could be caused by the mixture of fertilizers from the synergistic effect of calcium and nitrate or sulfate. Furthermore, the effect of nitrate was applied in nano form in the Ca4 and Ca-5 treatments, which contributed to improving nutrient uptake efficiency and plant growth compared to the other treatments. The peanut cultivar Giza-6 showed superiority for most measured traits over the other two cultivars. The interaction effect between the assessed cultivars and calcium applications was significant for various traits. The cultivar Giza-6 showed a significant advantage for most measured traits with the mixture of 50% calcium nitrate + 50% nano-calcium (Ca-4). Conclusively, the results pointed out the advantage of the exogenously sprayed nano-calcium form combined with calcium nitrate or calcium sulfate for promoting growth, leaf nutrient content, yield, and quality traits of peanut, particularly with high-yielding cultivars under sandy soil with high pH.

Canola is one of the important oil crops and is considered the most promising oil source and adapts to reclaimed soil conditions. The current study aimed to evaluate the influence of yeast extract (YE) integrated with nitrogen (N) rates and treatments were arranged as follows: Control (without F0), 95 kg N ha−1 (F1), 120 kg N ha−1 (F2), 142 kg N ha−1 (F3), 95 kg N ha−1 + YE (F4), 120 kg N ha−1 + YE (F5) and 142 kg N ha−1 + YE (F6) on physico-chemical properties, yield and its components for three Canola genotypes i.e. AD201 (G1), Topaz and SemuDNK 234/84 under the sandy soil. In this work, Results reveal that increasing rates of Nitrogen fertilization from 95 kg N ha−1 to 142 kg N ha−1 have a great effect on physicochemical properties yield and its components. The result proved that 142 kg N ha−1 with yeast treatment was the best treatment for three Canola genotypes. Also, the result showed that seed yield was positively correlated with Chl. a/b ratio, plant height, number of branches/plant, number of pods/plant, and number of seeds/pod, and a strong negative correlation was detected between seed oil percentage when the amount of nitrogen fertilization applied without or with yeast extract is increased.