Wide applications of personal consumer electronics have triggered tremendous need for portable power sources featuring light-weight and mechanical flexibility. Perovskite solar cells offer a compelling combination of low-cost and high device performance. Here we demonstrate high-performance planar heterojunction perovskite solar cells constructed on highly flexible and ultrathin silver-mesh/conducting polymer substrates. The device performance is comparable to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion efficiency of 14.0%, while the specific power (the ratio of power to device weight) reaches 1.96 kW kg−1, given the fact that the device is constructed on a 57-μm-thick polyethylene terephthalate based substrate. The flexible device also demonstrates excellent robustness against mechanical deformation, retaining >95% of its original efficiency after 5,000 times fully bending. Our results confirmed that perovskite thin films are fully compatible with our flexible substrates, and are thus promising for future applications in flexible and bendable solar cells.

Flexible and semitransparent organic solar cells (OSCs) have been regarded as the most promising photovoltaic devices for the application of OSCs in wearable energy resources and building‐integrated photovoltaics. Therefore, the flexible and semitransparent OSCs have developed rapidly in recent years through the synergistic efforts in developing novel flexible bottom or top transparent electrodes, designing and synthesizing high performance photoactive layer and low temperature processed electrode buffer layer materials, and device architecture engineering. To date, the highest power conversion efficiencies have reached over 10% of the flexible OSCs and 7.7% with average visible transmittance of 37% for the semitransparent OSCs. Here, a comprehensive overview of recent research progresses and perspectives on the related materials and devices of the flexible and semitransparent OSCs is provided.

All-inorganic perovskite solar cells (pero-SCs) are attracting considerable attention due to their promising thermal stability, but their inferior power-conversion efficiency (PCE) and moisture instability are hindering their application. Here, we used a gradient thermal annealing (GTA) method to control the growth of a-CsPbI 2 Br crystals and then utilized a green anti-solvent (ATS) isopropanol to further optimize the morphology of a-CsPbI 2 Br film. Through this GTA-ATS synergetic effect, the growth of a-CsPbI 2 Br crystals could be precisely controlled, leading to a high-quality perovskite film with one-micron average grain size, low root-mean-square of 25.9 nm, and reduced defect density. Pero-SCs based on this CsPbI 2 Br film achieved a champion scan PCE of 16.07% (stabilized efficiency of 15.75%), which is the highest efficiency reported in all-inorganic pero-SCs. Moreover, the CsPbI 2 Br pero-SC demonstrates excellent robustness against moisture and oxygen, and maintains 90% of initial PCE after aging 120 hr under 100 mW/cm 2 UV irradiation.

A series of polymer acceptors PF2-DTC, PF2-DTSi, and PF2-DTGe with identical molecular backbone but different central bridging atoms in tricyclic-fused donor units were developed. In all-PSCs, the PF2-DTSi-based blend film exhibited excellent mechanical robustness with an impressively high PCE of up to 10.77%. Moreover, the flexible solar cell based on this blend retained >90% of its initial PCE after bending and relaxing 1,200 times at a bending radius of 4 mm.