Rechargeable zinc–manganese dioxide batteries that use mild aqueous electrolytes are attracting extensive attention due to high energy density and environmental friendliness. Unfortunately, manganese dioxide suffers from substantial phase changes (e.g., from initial α-, β-, or γ-phase to a layered structure and subsequent structural collapse) during cycling, leading to very poor stability at high charge/discharge depth. Herein, cyclability is improved by the design of a polyaniline-intercalated layered manganese dioxide, in which the polymer-strengthened layered structure and nanoscale size of manganese dioxide serves to eliminate phase changes and facilitate charge storage. Accordingly, an unprecedented stability of 200 cycles with at a high capacity of 280 mA h g−1 (i.e., 90% utilization of the theoretical capacity of manganese dioxide) is achieved, as well as a long-term stability of 5000 cycles at a  utilization of 40%. The encouraging performance sheds light on the design of advanced cathodes for aqueous zinc-ion batteries.

Carbon dots (C-dots) with sulfur-doped (S-doped) was synthesized using a simple and straightforward hydrothermal method. The as-prepared S-doped C-dots exhibit significant high fluorescence quantum yield (67%) and unique emission property. The form spherical shaped S-doped C-dots have average diameter 4.6 nm and the fluorescence of S-doped C-dots can be effectively and selectively quenched by 10

It is a challenge to prepare organic electrodes for sodium-ion batteries with long cycle life and high capacity. The highly reactive radical intermediates generated during the sodiation/desodiation process could be a critical issue because of undesired side reactions. Here we present durable electrodes with a stabilized α-C radical intermediate. Through the resonance effect as well as steric effects, the excessive reactivity of the unpaired electron is successfully suppressed, thus developing an electrode with stable cycling for over 2,000 cycles with 96.8% capacity retention. In addition, the α-radical demonstrates reversible transformation between three states: C=C; α-C·radical; and α-C− anion. Such transformation provides additional Na+ storage equal to more than 0.83 Na+ insertion per α-C radical for the electrodes. The strategy of intermediate radical stabilization could be enlightening in the design of organic electrodes with enhanced cycling life and energy storage capability.

No abstract

Heteroatom doped carbon dots (CDs), with high photoluminescence quantum yield (PLQY), are of keen interest in various applications such as chemical sensors, bio-imaging, electronics, and photovoltaics. Zinc, an important element assisting the electron-transfer process and an essential trace element for cells, is a promising metal dopant for CDs, which could potentially lead to multifunctional CDs. In this contribution, we report a single-step, high efficiency, hydrothermal method to synthesize Zn-doped carbon dots (Zn-CDs) with a superior PLQY. The PLQY and luminescence characteristic of Zn-CDs can be tuned by controlling the precursor ratio, and the surface oxidation in the CDs. Though a few studies have reported metal doped CDs with good PLQY, the as prepared Zn-Cds in the present method exhibited a PLQY up to 32.3%. To the best of our knowledge, there is no report regarding the facile preparation of single metal-doped CDs with a QY more than 30%. Another unique attribute of the Zn-CDs is the high monodispersity and the resultant highly robust excitation-independent luminescence that is stable over a broad range of pH values. Spectroscopic investigations indicated that the superior PLQY and luminescence of Zn-CDs are due to the heteroatom directed, oxidized carbon-based surface passivation. Furthermore, we developed a novel and sensitive biosensor for the detection of hydrogen peroxide and glucose leveraging the robust fluorescence properties of Zn-CDs. Under optimal conditions, Zn-CDs demonstrated high sensitivity and response to hydrogen peroxide and glucose over a wide range of concentrations, with a linear range of 10-80 μM and 5-100 μM, respectively, indicating their great potential as a fluorescent probe for chemical sensing.

Highly Li+-conductive ZrNb24O62 is explored as a new intercalating pseudocapacitive anode material for boosting Li+-ion storage.

Hybrid organic/inorganic perovskite solar cells are invigorating the photovoltaic community due to their remarkable properties and efficiency. However, many perovskite solar cells show an undesirable current-voltage (I-V) hysteresis in their forward and reverse voltage scans, working to the detriment of device characterization and performance. This hysteresis likely arises from slow ion migration in the bulk perovskite active layer to interfaces which may induce charge trapping. We show that interfacial chemistry between the perovskite and charge transport layer plays a critical role in ion transport and I-V hysteresis in perovskite-based devices. Specifically, phenylene vinylene polymers containing cationic, zwitterionic, or anionic pendent groups were utilized to fabricate charge transport layers with specific interfacial ionic functionalities. The interfacial-adsorbing boundary induced by the zwitterionic polymer in contact with the perovskite increases the local ion concentration, which is responsible for the observed I-V hysteresis. Moreover, the ion adsorbing properties of this interface was exploited for perovskite-based memristors. This fundamental study of I-V hysteresis in perovskite-based devices introduces a new mechanism for inducing memristor behavior by interfacial ion adsorption.

Supportinginformation and the ORCID identification number(s) for the author(s) of this article can be found under: https://doi.