Iron sulfide (FeS) nanoparticles were prepared with sodium carboxymethyl cellulose (CMC) as a stabilizer, and tested for enhanced removal of aqueous mercury (Hg(2+)). CMC at ≥0.03 wt % fully stabilized 0.5 g/L of FeS (i.e., CMC-to-FeS molar ratio ≥0.0006). FTIR spectra suggested that CMC molecules were attached to the nanoparticles through bidentate bridging and hydrogen bonding. Increasing the CMC-to-FeS molar ratio from 0 to 0.0006 enhanced mercury sorption capacity by 20%; yet, increasing the ratio from 0.0010 to 0.0025 diminished the sorption by 14%. FTIR and XRD analyses suggested that precipitation (formation of cinnabar and metacinnabar), ion exchange (formation of Hg0.89Fe0.11S), and surface complexation were important mechanisms for mercury removal. A pseudo-second-order kinetic model was able to interpret the sorption kinetics, whereas a dual-mode isotherm model was proposed to simulate the isotherms, which considers precipitation and adsorption. High mercury uptake was observed over the pH range of 6.5-10.5, whereas significant capacity loss was observed at pH < 6. High concentrations of Cl(-) (>106 mg/L) and organic matter (5 mg/L as TOC) modestly inhibited mercury uptake. The immobilized mercury remained stable when preserved for 2.5 years at pH above neutral.
Hydrochars produced from different feedstocks (sawdust, wheat straw, and corn stalk) via hydrothermal carbonization (HTC) and KOH modification were used as alternative adsorbents for aqueous heavy metals remediation. The chemical and physical properties of the hydrochars and KOH-treated hydrochars were characterized, and the ability of hydrochars for removal of heavy metals from aqueous solutions as a function of reaction time, pH, and initial contaminant concentration was tested. The results showed that KOH modification of hydrochars might have increased the aromatic and oxygen-containing functional groups, such as carboxyl groups, resulting in about 2-3 times increase of cadmium sorption capacity (30.40-40.78 mg/g) compared to that of unmodified hydrochars (13.92-14.52 mg/g). The sorption ability among different feedstocks after modification was as the following: sawdust> wheat straw > corn stack. Cadmium sorption kinetics on modified hydrochars could be interpreted with a pseudo-second order, and sorption isotherm was simulated with Langmuir adsorption model. High cadmium uptake on modified hydrochars was observed over the pH range of 4.0-8.0, while for other heavy metals (Pb(2+), Cu(2+), and Zn(2+)) the range was 4.0-6.0. In a multi-metal system, the sorption capacity of heavy metals by modified hydrochars was also higher than that by unmodified ones and followed the order of Pb(II) > Cu(II) > Cd(II) > Zn(II). The results suggest that KOH-modified hydrochars can be used as a low cost, environmental-friendly, and effective adsorbent for heavy metal removal from aqueous solutions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.