Photoinduced atom transfer radical polymerization (ATRP) has been proved to be a versatile technique for polymer network formation. However, the slow polymerization rates of typical ATRP limited its application in the field of additive manufacturing (3D printing). In this work, we introduced carbon quantum dots (CQDs) for the first time to the ATRP in aqueous media and developed an ultrafast visible-light-induced polymerization system. After optimization, the polymerization could achieve a high monomer conversion (>90%) within 1 min, and the polydispersity index (PDI) of the polymer was lower than 1.25. This system was then applied as the first example of ATRP for the 3D printing of hydrogel through digital light processing (DLP), and the printed object exhibited good dimensional accuracy. Additionally, the excellent and stable optical properties of CQDs also provided interesting photoluminescence capabilities to the printed objects. We deduce this ATRP mediated 3D printing process would provide a new platform for the preparation of functional and stimuli-responsive hydrogel materials.

The utilizing light with broadband range has attracted lots of research interest for the photo induced reversibledeactivation radical polymerization (RDRP). However, it is still a challenge for a single catalyst to simultaneously respond to various lights with highly varied wavelengths. Here, we proposed a simple strategy for the preparation of a heterogeneous photocatalyst suitable for photo induced atom transfer radical polymerization (photoATRP) under full spectrum (from UV/vis light to NIR), by combining pyridine nitrogen doped carbon dots (N-CDs) and upconversion nanoparticles (UCNPs). In the presence of these robust UCNP@SiO 2 @N-CDs composite particles, the photoATRP could be carried on under the different irradiations of UV, blue, green, red, white, and 980 nm NIR light, with a low loading of part per million concentrations of the CuBr 2 /L catalyst. Moreover, the excellent solvent and aqueous compatibility allow UCNP@SiO 2 @N-CDs to be capable for photoATRP in both organic solvents and aqueous media, providing well-defined hydrophobic and hydrophilic polymers with low dispersity and excellent chain-end fidelity. In addition, the photoATRP with 980 nm NIR exhibited excellent penetrations through visible-light-proof barriers. The system could be used for the preparation of an injectable hydrogel that had dual curing and photoluminescence modes. Owing to the "living" characteristics of polymer chains achieved through ATRP, the hydrogel was capable to be easily repaired by using monomer as the binder.

Owing to the benefits of using natural or artificial light sources as a stimulus, photoinduced reversible-deactivation radical polymerization (photoRDRP) techniques have been recognized to be a powerful “green” platform for the preparation of well-defined polymers. However, the development of highly efficient visible light-induced photoRDRP processes in aqueous dispersed media remains a challenge due to light scattering and refraction by monomer droplets or colloidal particles. In this work, an efficient green photocatalyst, carbon quantum dots (CQDs), was introduced to visible light-mediated miniemulsion atom transfer radical polymerization (ATRP), leading to highly efficient polymerizations with reaction rates (>80% monomer conversion within 1 h) much higher than in previous studies. This heterogeneous photocatalytic system is presumed to involve three catalytic cycles in (i) the aqueous phase, (ii) the oil–water interface, and (iii) the monomer droplets. The effect of different polymerization parameters on the polymerization reaction was investigated, including the amounts of surfactant and CQDs, CuBr2 dosage, and solid content. Excellent temporal control of the polymerization was illustrated by “ON/OFF” polymerizations, and natural sunlight was also used as an energy source. This novel CQDs-catalyzed miniemulsion photoATRP process may be easily extended to other aqueous dispersion RDRP systems. As an extension of our previous work (J. Am. Chem. Soc. 2022, 144 (22), 9817–9826) we also developed a “one-pot” method for the rapid preparation of heterogeneous hydrogels.

Vitellin (Vt) was purified from eggs of parthenogenetic bush tick Haemaphysalis longicornis by gel filtration and ion exchange chromatography. Our results revealed that only one single Vt existed in parthenogenetic bush tick, and the purified Vt was proved to be a hemoglycolipoprotein consisting of nine polypeptides with molecular weights of 203, 147, 126, 82, 74, 70, 61, 47 and 31 kDa, respectively. Polyclonal antibody and monoclonal antibody against Vt were produced using the purified Vt. The change in vitellogenin (Vg) and Vt levels over time of the parthenogenetic H. longicornis was established, and the Vg content in haemolymph and Vt in ovary at different feeding or engorgement statuses was also determined using a double antibody sandwich enzyme-linked immunosorbent assay. The Vg level in haemolymph was distinctly increased on the day of engorgement (1.785 mg/mL) and continued to increase until 2nd day post-engorgement (5.611 mg/mL). There was a slight decrease in Vg level after 4 days of engorgement, and a second peak was observed on day 2 post-oviposition (10.774 mg/mL). Subsequently, Vg content continuously decreased and reached a low level on the 10th day post-oviposition. The Vt content in ovary continuously increased once the female reached its critical weight (0.024 mg per female), and reached the maximum level on day 2 post-oviposition (1.942 mg per female). Afterwards, Vt content rapidly decreased.

Without traditional degassing operation, the resultant NMP with Dispolreg 007 as the alkoxyamine initiator exhibited similar living and control behavior as the one performed under degassing.