Three types of multi-wall shielding were experimentally investigated for their performances under the high-velocity impact of a cm-size cylindrical projectile by using a two-stage light-gas gun. The three shields contained the same two aluminum bumpers but different rear walls, which were 7075-T651 aluminum (Al) plate, boron carbide (B4C)/Al 7075-T651/Kevlar composite plate and B4C/ultra-high molecular weight polyethylene (UHMW-PE) composite plate. The impact test was carried out using a cylindrical shape of 6 g mass 7075-T651 Al projectile in a speed range (1.6 to 1.9 km/s) to achieve an effective shield configuration. A numerical simulation was undertaken by using ANSYS Autodyn-3D and the results of this were in good agreement with the experimental results. Meanwhile, both the experimental and the numerical simulation results indicated that B4C/UHMW-PE composite plates performed a better interception of the high-velocity projectiles within the specific speed range and could be considered as a good configuration for intercepting large fragments in shielding design.
Impact cratering experiments were performed on semi-infinite concrete targets with 7 mm-diameter 40CrNiMo steel long-rod projectiles at impact velocities ranging from 2117 m/s to 3086 m/s by using a two-stage combustion light-gas gun. After the impact experiments, the crater diameter and depth as well as the crater volume were carefully measured. The concrete fragments were collected from the target chamber and the fragment mass was measured. The size of the crater (including the volume, diameter, and depth) and the fragment mass increased with increasing impact velocities, while the fragment distributions at different impact velocities were almost the same. Scaling laws for the crater volume impacted by the rod-shaped projectile were discussed and an empirical formula of crater volume was determined by the experimental data from the literature. Through the verification of the present experimental results, the predictive ability of the empirical formula proved to be reliable. Scaling laws for the size distribution of concrete fragments were also discussed. The normalized fragment mass distribution was proportional to the impact velocity raised to the power 1.5.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.