Although preparation conditions are known to affect the morphology and catalytic performance of hydrothermally synthesized MoS2, the influence of pH remains unclear. Herein, unsupported MoS2 was prepared from ammonium tetrathiomolybdate (ATTM) by a hydrothermal reaction at various pH values under a reaction pressure of 2 MPa. The physical and chemical properties of the MoS2 samples were characterized, and the catalytic performance for CO methanation was examined. With increasing pH, the morphology of the MoS2 particles transformed from aggregates of irregular grain-like particles to flower-like particles through the agglomeration of fine mesoporous nanoflakes. Hydrothermal synthesis at a pH of 9.5 increased the MoS2 crystallinity by enhancing the stacking of the (0 0 2) lattice plane. The MoS2 samples prepared at pH 7.0 and 9.5 showed increased CO conversion during methanation, which was associated with a low concentration of Mo5+ species and the presence of surface sulfate species. Thus, a high pH during catalyst preparation may promote the complete decomposition of ATTM to MoS2 and the formation of sulfur vacancies, which can facilitate methanation.

A 5 kg/hr scale integral dual fluidized-bed gasifier for producing medium heating value syngas from biomass or combustible wastes was manufactured. The effect of operating variables including gasification temperature, rate of feeding, and weight ratio of steam/feed on the behavior of the gasifier was investigated. The contents of H2 and CO in syngas, flow rate of feeding, cold gas efficiency increased with the increased gasification temperature or rate of feeding, but decreased with the increased weight ratio of steam/feed within the experimental range. With wood powder as the feed, the concentrations of H2 and CO in the syngas were as high as 41% and 32%, and the cold gas efficiency and lower heating value of the syngas were as high as 70.1% and 3,428 kcal/Nm 3 . With food wastes as the feed, the concentrations of H2 and CO in the syngas were as high as 37% and 23.9%, and the cold gas efficiency and lower heating value of the syngas were as high as 66.7% and 3,670 kcal/Nm 3 .