A novel method to adjust the composition of a material while maintaining its morphology was described in this study. Nickel sulfide, the material investigated in this work, was found to be useful as a high surface area electrode material for supercapacitor applications. First, a nest-like Ni 3 S 2 @NiS composite electrode with 1D nanorod as structural unit was synthesized by simultaneously using Ni foam as template and Ni as a source through a one-step in situ growth method. Co and Se ions, which respectively acted as beneficial cation and anion, were successfully introduced into the nest-like Ni 3 S 2 @NiS material, resulting in the formation of Ni 3 S 2 @Co 9 S 8 and NiS@NiSe 2 composite electrodes with structures similar to those of the parent materials. The material structure was virtually retained and single-crystal-to-single-crystal transformation was achieved in the process. Introducing the cation and anion into the same type of material while maintaining topology could be important for the field of material synthesis and preparation of supercapacitor electrodes. Moreover, the electrochemical properties of these three materials were studied by cyclic voltammetry measurements and galvanostatic charge−discharge tests. The results indicated that the rate performance was improved significantly by ion exchange. In particular, the derived electrode with Se still showed superior oxidation and reduction ability at high scan rate of 10000 mV s −1 . In addition, the second charge−discharge specific capacity also increased from 516 F g −1 to 925 F g −1 and 1412 F g −1 at the current density of 0.5 A g −1 and by Co and Se exchange, respectively. This work contributes to the knowledge on electrode materials for supercapacitors and can provide good reference for the fabrication of desired materials.

In this paper, the design, synthesis, and measurement of a new and hierarchically structured series of NixCo1-xS1.097 electroactive materials are reported. The materials were synthesized through an ion-exchange process using hierarchically structured CoS1.097 as precursors, and a strategy utilizing the synergistic effect of double metal ions was developed. Two complementary metal ions were used to enhance the performance of electrode materials. The specific capacitance of the electroactive materials was continuously improved by increasing the nickel ion content, and the electric conductivity was also enhanced when the cobalt ion was varied. Experimental results showed that the nickel ion content in NixCo1-xS1.097 could be adjusted from x = 0 to 0.48. Specifically, when x = 0.48, the composite exhibited a remarkable maximum specific capacitance approximately 5 times higher than that of the CoS1.097 precursors at a current density of 0.5 A g(-1). Furthermore, the specific capacitance of Ni0.48Co0.52S1.097 electrodes that were modified with reduced graphene oxide could reach to 1152 and 971 F g(-1) at current densities of 0.5 and 20 A g(-1) and showed remarkably higher electrochemical performance than the unmodified electrodes because of their enhanced electrical conductivity. Thus, the strategy utilizing the synergistic effect of double metal ions is an alternative technique to fabricate high-performance electrode materials for supercapacitors and lithium ion batteries.

No abstract

No abstract

No abstract