Semiconductor quantum dots (QDs) are extremely interesting materials for the development of photovoltaic devices, but currently the present the drawback is that the most efficient devices have been prepared with toxic heavy metals of Cd or Pb. Solar cells based on "green" QDs totally free of Cd or Pbpresent a modest efficiency of 2.52%. Herein we achieve effective surface passivation of the ternary CuInS 2 (CIS) QDs that provides high photovoltaic quality core/shell CIS/ZnS (CIS-Z) QDs, leading to the development of high-efficiency green QD solar cells that surpass the performance of those based on the toxic cadmium and lead chalcogenides QDs. Using wide absorption range QDs, CIS-Zbased quantum dot sensitized solar cell (QDSC) configuration with high QD loading and with the benefit of the recombination reduction with type-I core/shell structure, we boost the power conversion efficiency of Cd-and Pb-free QDSC to a record of 7.04% (with certified efficiency of 6.66%) under AM 1.5G one sun irradiation. This efficiency is the best performance to date for QDSCs and also demonstrates that it is possible to obtain comparable or even better photovoltaic performance from green CIS QDs to the toxic cadmium and lead chalcogenides QDs.

Hydrogen production by electrocatalytic water splitting is an efficient and economical technology, however, is severely impeded by the kinetic-sluggish and low value-added anodic oxygen evolution reaction. Here we report the nickel-molybdenum-nitride nanoplates loaded on carbon fiber cloth (Ni-Mo-N/CFC), for the concurrent electrolytic productions of high-purity hydrogen at the cathode and value-added formate at the anode in low-cost alkaline glycerol solutions. Especially, when equipped with Ni-Mo-N/CFC at both anode and cathode, the established electrolyzer requires as low as 1.36 V of cell voltage to achieve 10 mA cm−2, which is 260 mV lower than that in alkaline aqueous solution. Moreover, high Faraday efficiencies of 99.7% for H2 evolution and 95.0% for formate production have been obtained. Based on the excellent electrochemical performances of Ni-Mo-N/CFC, electrolytic H2 and formate productions from the alkaline glycerol solutions are an energy-efficient and promising technology for the renewable and clean energy supply in the future.

Metal-organic frameworks (MOFs) have received great attention due to their fascinating structures and intriguing potential applications in various fields. Herein, we report the first example of the utilization of MOFs for solid-phase microextraction (SPME). MOF-199 with unique pores and open metal sites (Lewis acid sites) was employed as the coating for SPME fiber to extract volatile and harmful benzene homologues. The SPME fiber was fabricated by in situ hydrothermal growth of thin MOF-199 films on etched stainless steel wire. The MOF-199-coated fiber not only offered large enhancement factors from 19,613 (benzene) to 110,860 (p-xylene), but also exhibited wide linearity with 3 orders of magnitude for the tested benzene homologues. The limits of detection for the benzene homologues were 8.3-23.3 ng L(-1). The relative standard deviation (RSD) for six replicate extractions using one SPME fiber ranged from 2.0% to 7.7%. The fiber-to-fiber reproducibility for three parallel prepared fibers was 3.5%-9.4% (RSD). Indoor air samples were analyzed for the benzene homologues using the SPME with the MOF-199-coated fiber in combination with gas chromatography-flame ionization detection. The recoveries for the spiked benzene homologues in the collected indoor air samples were in the range of 87%-106%. The high affinity of the MOF-199-coated fiber to benzene homologues resulted from the combined effects of the large surface area and the unique porous structure of the MOF-199, the pi-pi interactions of the aromatic rings of the analytes with the framework 1,3,5-benzenetricarboxylic acid molecules, and the pi-complexation of the electron-rich analytes to the Lewis acid sites in the pores of MOF-199.

The electrochemical conversion of carbon dioxide into energy‐carrying compounds or value‐added chemicals is of great significance for diminishing the greenhouse effect and the efficient utilization of carbon‐dioxide emissions, but it suffers from the kinetically sluggish anodic oxygen evolution reaction (OER) and its less value‐added production of O2. We report a general strategy for efficient formic‐acid synthesis by a concurrent cathodic CO2 reduction and anodic partial methanol‐oxidation reaction (MOR) using mesoporous SnO2 grown on carbon cloth (mSnO2/CC) and CuO nanosheets grown on copper foam (CuONS/CF) as cathodic and anodic catalysts, respectively. Anodic CuONS/CF enables an extremely lowered potential of 1.47 V vs. RHE (100 mA cm−2), featuring a significantly enhanced electro‐activity in comparison to the OER. The cathodic mSnO2/CC shows a rather high Faraday efficiency of 81 % at 0.7 V vs. RHE for formic‐acid production from CO2. The established electrolyzer equipped with CuONS/CF at the anode and mSnO2/CC at the cathode requires a considerably low cell voltage of 0.93 V at 10 mA cm−2 for formic‐acid production at both sides.

Registro de acceso restringido Este recurso no está disponible en acceso abierto por política de la editorial. No obstante, se puede acceder al texto completo desde la Universitat Jaume I o si el usuario cuenta con suscripción. Registre d'accés restringit Aquest recurs no està disponible en accés obert per política de l'editorial. No obstant això, es pot accedir al text complet des de la Universitat Jaume I o si l'usuari compta amb subscripció. Restricted access item This item isn't open access because of publisher's policy. The full--text version is only available from Jaume I University or if the user has a running suscription to the publisher's contents.