An ultrasensitive electrochemiluminescence (ECL) biosensor was proposed based on a closed bipolar electrode (BPE) for the detection of alkaline phosphatase (ALP). For most of the BPE–ECL biosensors, an effective signal amplification strategy was the key to enhance the sensitivity of the system. Herein, the signal amplification strategy of the enzyme catalysis was utilized in the BPE–ECL system. Au nanoparticles (NPs) were electrodeposited on the cathode surface of the ITO electrode to improve the stability and sensitivity of the signal. Compared with the previous BPE–ECL biosensors, the sensitivity was increased by at least 3 orders of magnitude. The biosensor showed high sensitivity and specificity of ALP detection with a detection limit of as low as 3.7 aM. Besides, it was further applied to the detection of ALP in different types of cells and successfully realized ALP detection in single Hep G2 cell, which had a huge application prospect in single biomolecule detection or single cell analysis.

Accurate size analysis of nanoparticles (NPs) is vital for nanotechnology. However, this cannot be realized based on conventional single-nanoparticle collision (SNC) because the current intensity, a thermodynamic parameter of SNC for sizing NPs, is always smaller than the theoretical value due to the effect of NP movements on the electrode surface. Herein, a size-dependent dynamic parameter of SNC, current lifetime, which refers to the time that the current intensity decays to 1/e of the original value, was originally utilized to distinguish differently sized NPs. Results showed that the current lifetime increased with NP size. After taking the current lifetime into account rather than the current intensity, the overlap rates for the peak-type current transients of differently sized Pt NPs (10 and 15 nm) and Au NPs (18 and 35 nm) reduced from 73 and 7% to 45 and 0%, respectively, which were closer to the theoretical values (29 and 0%). Hence, the proposed SNC dynamics-based method holds great potential for developing reliable electrochemical approaches to evaluate NP sizes accurately.

Limited to the accuracy of size resolution, single entity collision biosensing (SECBS) for multiplex immunoassays remains challenging, because it is difficult to get the true value of nanoparticle (NP) sizes based on the current intensity due to the complex movement of NPs on the electrode surface. Considering that the size-dependent movement of NPs meanwhile will generate a characteristic current shape, in this work, the huge difference in the current rise time of 5 and 15 nm Pt NPs colliding on an Au ultramicroelectrode (d = 30 μm) was originally used to develop a size-resolved SECBS for multiplex immunoassays of miRNAs. The limit concentration that can be detected was 0.5 fM. Compared with conventional electrochemical biosensors for multiplex immunoassays, for the size-resolved SECBS, one does not need to worry about potential overlapping. Therefore, the proposed method demonstrates a promising potential for the application of SECBS in multiplex immunoassays.

Single-nanoparticle collision electrochemistry (SNCE) has gradually become an attractive analytical method due to its advantages in analytical detection, such as a fast response, low cost, low sample consumption, and in situ real-time detection of analytes. However, the biological analyte's direct detection based on the SNCE blocking mode has the problems of low sensitivity and specificity. In this work, an SNCE biosensor based on SNCE electrocatalytic strategy was used for the detection of H7N9 AIV. Nucleic acid aptamers were introduced to recognize the target virus (H7N9 AIV). After the recognition event, ssDNA 1 was released and hybridized with another ssDNA 2 . Owing to the nicking endonuclease Nt.AlwI-mediated target nucleic acid cyclic amplification, one virus particle can indirectly induce the release of 4.2 × 10 6 Au NPs that can be counted by the SNCE electrocatalytic strategy. The high conversion efficiency greatly improved the detection sensitivity, and the detection limit was as low as 24.3 fg/mL. Therefore, the constructed biosensor can achieve a highly sensitive and specific detection of H7N9 AIV and show a great potential in bioanalytical application.

In situ monitoring of the agglomeration/aggregation process of nanoparticles (NPs) is crucial because it seriously affects cell entry, biosafety, catalytic performance of NPs, and so on. Nevertheless, it remains hard to monitor the solution phase agglomeration/aggregation of NPs via conventional techniques such as electron microscopy, which requires sample pretreatment and cannot represent native state NPs in solution. Considering that single-nanoparticle electrochemical collision (SNEC) is powerful to detect NPs in solution at the single-particle level, and the current lifetime, which refers to the time that current intensity decays to 1/e of the original value, is skilled in distinguishing different sized NPs, herein, a current lifetime-based SNEC has been developed to distinguish a single Au NP (d = 18 nm) from its agglomeration/aggregation. Based on this, the agglomeration/aggregation process of small-sized NPs and the discrimination of agglomeration vs aggregation have been carefully investigated at the single-particle level. Results showed that the agglomeration/ aggregation of Au NPs (d = 18 nm) in 0.8 mM HClO 4 climbed from 19% to 69% over two hours, whereas there was no visible granular sediment, and Au NPs tended to agglomerate rather than aggregate irreversibly under normal conditions. Hence, the proposed current lifetime-based SNEC could serve as a complementary method to in situ monitor the agglomeration/aggregation of small-sized NPs in solution at the single-particle level and provide effective guidance for the practical application of NPs.