Moat, In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel, (2016), AbstractTo inform the design of superior transformation-induced plasticity (TRIP) steels, it is important to understand what happens at the microstructural length scales. In this study, strain-induced martensitic transformation is studied by in situ digital image correlation (DIC) in a scanning electron microscope. Digital image correlation at submicron length scales enables mapping of transformation strains with high confidence. These are correlated with electron backscatter diffraction (EBSD) prior to and post the deformation process to get a comprehensive understanding of the strain-induced transformation mechanism. The results are compared with mathematical models for enhanced prediction of strain-induced martensitic phase transformation.

No abstract

Duplex stainless steels are a group of widely used stainless steels, because of their attractive combination of strength and corrosion resistance. However, these steels embrittle because of a phase separation phenomenon in the ferrite phase when exposed to temperatures within the miscibility gap. This manuscript investigates the phase separation in two commercial stainless steels, the duplex stainless steel (DSS) 22Cr-5Ni (2205 or UNS S32205), and the super-duplex stainless steel (SDSS) 25Cr-7Ni (2507 or UNS S32750), and its subsequent effect on mechanical property evolution. Long-term isothermal aging heat treatments were carried out at industrially relevant temperatures between 250 °C and 350 °C for up to 48,000 hours, and quantitative measurements of the amplitude and wavelength of the phase separated nanostructure were obtained using Small-Angle Neutron Scattering (SANS). These quantifications were used as input parameters in hardness models to predict the hardness evolution. It is concluded that the quantitative information from SANS combined with these hardness models enables the prediction of hardness evolution in DSS at low temperatures, which in turn correlates with the embrittlement of the DSS.

The Open University's repository of research publications and other research outputs The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel

For guidance on citations see FAQs.

No abstract

An approach is presented that allows multi-scale characterisations of heterogeneous deformation in crystalline materials by employing a range of characterisation techniques including: electron backscatter diffraction, digital image correlation and neutron diffraction powder measurements. The approach will be used to obtain critical information about the variations in parameters that characterise the deformed state in different crystallographic orientation texture components of a sample in a statistically significant way. These parameters include lattice strains, texture evolution, peak broadening, dislocation density, planar faults, phase changes and surface strain. This approach allows verification of models of plastic deformation to provide a more detailed view of plastic deformation heterogeneity at multiple length scales than obtained by other characterisation approaches. The approach demonstrated here is applied to two stainless steel alloys; an alloy that exhibits phase transformation during deformation and an alloy that remains the same phase all through deformation process.

No abstract