Rapid and efficient demulsification (destabilizing of an emulsion) processes of a water in oil (W/O) emulsion were carried out in a three-dimensional electric spiral plate-type microchannel (3D-ESPM). In this experiment, the demulsifying efficiency of emulsions by 3D-ESPM was compared with that by gravity settling, the factors influencing demulsifying efficiency were investigated, and the induction period, cut size and residence time in the demulsification process were studied. The results showed that in contrast to the gravity settling method, 3D-ESPM can directly separate the disperse phase (water) instead of the continuous phase (oil). The maximum demulsifying efficiency of W/O emulsion in a single pass through the 3D-ESPM reached 90.3%, with a microchannel height of 200 μm, electric field intensity of 250 V /cm, microchannel angle of 180°, microchannel with 18 plates and a flow rate of 2 mL /min. An induction period of 0.6 s during the demulsification process was simulated with experimental data fitting. When the residence time of emulsion in 3D-ESPM was longer than the induction period, its demulsifying efficiency increased as the increase of the flow velocity due to the droplet coalescence effects of Dean vortices in the spiral microchannel. For this device a cut size of droplets of 4.5 μm was deduced. Our results showed that the demulsification process of W/O emulsion was intensified by 3D-ESPM based on the coupling effect between electric field-induced droplets migration and microfluidic hydrodynamic trapping.
Asymmetric plate-type micro-channels (APM) have one hydrophobic wall and one hydrophilic wall. By flowing through APM, a kerosene-in-water emulsion can be de-emulsified in one second. To date, however, the demulsification process in the APM is still a black box. In order to observe the demulsification process directly, transparent asymmetric plate-type micro-channels (TAPM) were fabricated with two surface-modified glass plates. Emulsions with oil contents of 10%, 30%, and 50% were pumped through TAPM with heights of 39.2 μm and 159.5 μm. The movement and coalescence of oil droplets (the dispersed phase of a kerosene-in-water emulsion) in the TAPM were observed directly with an optical microscope. By analyzing videos and photographs, it was found that the demulsification process included three steps: oil droplets flowed against and were adsorbed on the hydrophobic wall, then oil droplets coalesced to form larger droplets, whereupon the oil phase was separated. The experimental results showed that the demulsification efficiency was approximately proportional to the oil content (30–50%) of the emulsions and increased when the micro-channel height was reduced.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.