Although β-CsPbI3 has a bandgap favorable for application in tandem solar cells, depositing and stabilizing β-CsPbI3 experimentally has remained a challenge. We obtained highly crystalline β-CsPbI3 films with an extended spectral response and enhanced phase stability. Synchrotron-based x-ray scattering revealed the presence of highly oriented β-CsPbI3 grains, and sensitive elemental analyses—including inductively coupled plasma mass spectrometry and time-of-flight secondary ion mass spectrometry—confirmed their all-inorganic composition. We further mitigated the effects of cracks and pinholes in the perovskite layer by surface treating with choline iodide, which increased the charge-carrier lifetime and improved the energy-level alignment between the β-CsPbI3 absorber layer and carrier-selective contacts. The perovskite solar cells made from the treated material have highly reproducible and stable efficiencies reaching 18.4% under 45 ± 5°C ambient conditions.

Key insights into the evolution of lithium-ion batteries: present, future, and hybridized technologies.

Thermal gravimetric and differential thermal analysis (TG-DTA) coupled with quadrupole mass spectrometry (MS) and first principles calculations were employed to elucidate the chemical nature of released gases during the thermal decomposition of CH3NH3PbI3.

Silver is a low‐cost candidate electrode material for perovskite solar cells. However, in such cells the silver electrodes turn yellow within days of device fabrication. The color change is also accompanied by a dramatic decrease in the power conversion efficiency when compared to otherwise identical devices using gold electrodes. Here, it is shown that the color change results from silver oxidation to silver iodide, due to a reaction with iodine in methyl ammonium lead perovskite. The change in X‐ray diffraction and X‐ray photo­electron spectroscopy is discussed. Exposure to air accelerates corrosion of the Ag electrodes when compared to dry nitrogen gas exposure. However, iodine not reacted with silver is observed by X‐ray photoelectron spectroscopy even for the perovskite solar cell kept in dry nitrogen gas. It is proposed that silver iodide is formed when methyl ammonium iodide migration is facilitated by the small pinholes in the hole transport layer spiro‐MeOTAD.

Strategies of how to mitigate photodegradation and thermal degradation processes are proposed in this work in order to further improve operational stability in hybrid perovskite solar cells.

No abstract

Organic-inorganic halide perovskite materials (e.g., MAPbI, FAPbI, etc.; where MA = CHNH, FA = CH(NH)) have been studied intensively for photovoltaic applications. Major concerns for the commercialization of perovskite photovoltaic technology to take off include lead toxicity, long-term stability, hysteresis, and optimal bandgap. Therefore, there is still need for further exploration of alternative candidates. Elemental composition engineering of MAPbI and FAPbI has been proposed to address the above concerns. Among the best six certified power conversion efficiencies reported by National Renewable Energy Laboratory on perovskite-based solar cells, five are based on mixed perovskites (e.g., MAPbIBr, FAMAPbIBr, CsFAMAPbIBr). In this paper, we review the recent progress on the synthesis and fundamental aspects of mixed cation and halide perovskites correlating with device performance, long-term stability, and hysteresis. In the outlook, we outline the future research directions based on the reported results as well as related topics that warrant further investigation.

There has been an urgent need to eliminate toxic lead from the prevailing halide perovskite solar cells (PSCs), but the current lead-free PSCs are still plagued with the critical issues of low efficiency and poor stability. This is primarily due to their inadequate photovoltaic properties and chemical stability. Herein we demonstrate the use of the lead-free, all-inorganic cesium tin-germanium triiodide (CsSn0.5Ge0.5I3) solid-solution perovskite as the light absorber in PSCs, delivering promising efficiency of up to 7.11%. More importantly, these PSCs show very high stability, with less than 10% decay in efficiency after 500 h of continuous operation in N2 atmosphere under one-sun illumination. The key to this striking performance of these PSCs is the formation of a full-coverage, stable native-oxide layer, which fully encapsulates and passivates the perovskite surfaces. The native-oxide passivation approach reported here represents an alternate avenue for boosting the efficiency and stability of lead-free PSCs.