and available online here Cet article fait partie du dossier thématique ci-dessous publié dans la revue OGST, Vol. 70, n°6, pp. 909-1132 et téléchargeable ici D o s s i e rOil & Gas Science and Technology -Rev. IFP Energies nouvelles, Vol. 70 (2015), No. 6, pp. 909-1132 Copyright © 2015, IFP Energies nouvelles > Editorial -Enhanced Oil Recovery (EOR), Asphaltenes and HydratesÉditorial -EOR «récupération assistée du pétrole», Asphaltènes et Hydrates D. Langevin and F. Baudin ENHANCED OIL RECOVERY (EOR) > HP-HT Drilling Mud Based on Environmently-Friendly Fluorinated ChemicalsBoues de forage HP/HT à base de composés fluorés respectueux de l'environnement Abstract -Hydrate is one of the critical precipitates which have to be controlled for subsea flow assurance. The induction time of hydrate is therefore a significant parameter. However, there have been few studies on the induction time of the natural gas hydrate formation in a flow loop system. Consequently, a series of experiments were firstly performed, including water, natural gas and Diesel oil, on the hydrate induction time under various conditions such as the supercooling and supersaturation degree, water cut, anti-agglomerant dosage, etc. The experiments were conducted in a high-pressure hydrate flow loop newly constructed in the China University of Petroleum (Beijing), and dedicated to flow assurance studies. Then, based on previous research, this study puts forward a method for induction time, which is characterized by clear definition, convenient measurement and good generality. Furthermore, we investigated the influences of the experimental parameters and analyzed the experimental phenomena for the hydrate induction time in a flowing system.

No abstract

No abstract