Tin‐based perovskites with excellent optoelectronic properties and suitable band gaps are promising candidates for the preparation of efficient lead‐free perovskite solar cells (PSCs). However, it is challenging to prepare highly stable and efficient tin‐based PSCs because Sn2+ in perovskites can be easily oxidized to Sn4+ upon air exposure. Here we report the fabrication of air‐stable FASnI3 solar cells by introducing hydroxybenzene sulfonic acid or its salt as an antioxidant additive into the perovskite precursor solution along with excess SnCl2. The interaction between the sulfonate group and the Sn2+ ion enables the in situ encapsulation of the perovskite grains with a SnCl2–additive complex layer, which results in greatly enhanced oxidation stability of the perovskite film. The corresponding PSCs are able to maintain 80 % of the efficiency over 500 h upon air exposure without encapsulation, which is over ten times longer than the best result reported previously. Our results suggest a possible strategy for the future design of efficient and stable tin‐based PSCs.

Maintaining the stability of tin halide perovskites is a major challenge in developing lead-free perovskite solar cells (PSCs). Adding extra SnX2 (X = F, Cl, or Br) in the precursor solution to inhibit Sn2+ oxidation is an essential strategy to improve device efficiency and stability. However, SnX2 on the surface of perovskite grains tends to prohibit charge transfer across perovskite films. Here, we report a coadditive engineering approach by introducing antioxidant gallic acid (GA) together with SnCl2 to improve the performance of tin-based PSCs. The SnCl2–GA complex can not only protect the perovskite grains but also more effectively conduct electrons across it, leading to highly stable and efficient PSCs. The unencapsulated devices can maintain ∼80% of their initial efficiency after 1000 h of storage in ambient air with a relative humidity of 20%, which is the best air stability achieved in tin-based PSCs to date.

An optimized solid electrolyte interphase is the key to stabilization of microparticle anodes.

Owing to their large absorption cross-sections and high photoluminescence quantum yields, lead halide perovskite quantum dots (PQDs) are regarded as a promising candidate for various optoelectronics applications. However, easy degradation of PQDs in water and in a humid environment is a critical hindrance for applications. Here we develop a Pb-S bonding approach to synthesize water-resistant perovskite@silica nanodots keeping their emission in water for over six weeks. A two-photon whispering-gallery mode laser device made of these ultra-stable nanodots retain 80% of its initial emission quantum yield when immersed in water for 13 h, and a two-photon random laser based on the perovskite@silica nanodots powder could still operate after the nanodots were dispersed in water for up to 15 days. Our synthetic approach opens up an entirely new avenue for utilizing PQDs in aqueous environment, which will significantly broaden their applications not only in optoelectronics but also in bioimaging and biosensing.

Identification of the active species in electrocatalysts toward hydrogen evolution reaction (HER) is of great significance for the development of the catalytic industry; however, it is still the subject of considerable controversy. Herein, we applied operando synchrotron X-ray powder diffraction (SXRD) in the NiSe 2 electrocatalyst system, and an in situ phase transformation from cubic NiSe 2 to hexagonal NiSe was revealed. The NiSe phase showed an enhanced catalytic activity. Operando Raman spectroscopy verified the decomposition of NiSe 2 during HER. Theoretical calculations suggested that the charge transfers from the Se site to Ni site during this evolution process, leading to an increased conductivity and a shifting up of d-band center, which is attributed to the enhanced activity. The generated NiSe phase acts as the "real" active species. Our work unravels the underlying phase transition of the electrocatalyst on reductive conditions in alkaline medium and highlights the significance of identifying the intrinsic active sites under realistic reaction conditions.