In the present study, we proposed an effective, efficient, and economical approach to disinfect water using a novel, advanced, rotational hydrodynamic cavitation reactor (HCR). First, analyses of the flow field and cavitation generation mechanism in the HCR were conducted through visualization of the reactor flow field using a high-speed camera. Second, the thermal performance was tested in 20 experiments with various rotational speeds of the rotor (2700, 3000, 3300, and 3600 rpm) and pump pressure settings (0.0, 0.5, 0.7, 1.0, and 1.5 bar gauge pressure). The HCR maximally achieved a heat generation rate of 48.15 MJ/h and thermal efficiency of 82.18%. Then, the disinfection effect was evaluated using water that simulated an effluent containing Escherichia coli (E. coli) for various flow rates (8, 11, and 14 L/min), a pump pressure setting fixed at 0.5 bar, and a rotational speed of 3600 rpm. In addition, an economical assessment of the disinfection processes was performed by considering the measured electric consumption. The thermal effect generated by the HCR was the dominant factor affecting the concentration of E. coli. The HCR achieved a 100% disinfection rate with a 4.3 L/min treatment rate and a cost of US $ 3.019/m at the optimal flow rate. The effects of the pressure setting and rotational speed on the performance were discussed in detail. Finally, compared to the recent studies, the treatment rate of the HCR is several hundred times greater than that obtained by the HCRs utilized in those studies, and also has a reasonable cost.
In this paper, CeO(2) nanotubes based on the Kirkendall effect (for simplicity, this type of nanotubes is denoted as K-type CeO(2) nanotubes) are fabricated through a solid-liquid interface reaction between Ce(OH)CO(3) nanorods and NaOH solutions. Our studies indicate the formation mechanism of K-type CeO(2) nanotubes is quite different from those of CeO(2) nanotubes subjected to template (T-type CeO(2) nanotubes) and lamellar rolling (L-type CeO(2) nanotubes) reported previously by our group. The K-type CeO(2) nanotubes are prepared by congregating Kirkendall voids and subsequent calcinations. The time evolution processes are imaged by TEM, and the results show that as the reaction processes, interior spaces are formed and enlarged in Ce(OH)CO(3) nanorods to form K-type CeO(2) nanotubes. In contrast, the interior space in T-type CeO(2) nanotubes decreases with reaction time. XRD is applied to study the phase transformation in the formation process of K-type CeO(2) nanotubes. Our study also indicates NaOH and reaction temperature are two key factors responsible for formation of K-type CeO(2) nanotubes. Combined with the T- and L-type nanotubes, three types of CeO(2) nanotubes with different formation mechanisms are successfully synthesized in one reaction system, which might afford some guidance for the synthesis of other inorganic nanotubes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.