In this study, we develop Janus membranes comprising a hydrophilic zwitterionic polymer layer and an omniphobic (all-liquid-repelling) porous substrate that simultaneously possess fouling and wetting resistances. An omniphobic membrane was first fabricated by attaching silica nanoparticles (SiNPs) to the fibers of a quartz fiber mat, creating multilevel reentrant structures, followed by surface fluorination to reduce the surface energy. The Janus membrane was then fabricated by grafting a zwitterionic polymer brush layer via surface-initiated atom-transfer radical-polymerization (ATRP) on the omniphobic substrate. Membrane characterizations, including Fourier-transform infrared spectroscopy, fluorescence microscopy, and contact angle measurements, confirm that the surface hydrophilicity can be finely tuned by adjusting the duration of the ATRP reaction. Also, the zwitterionic polymer brush layer was confined on the top surface of the Janus membrane, rendering the surface hydrophilic, while the remaining part of the Janus membrane remained omniphobic, resisting the wicking of lowsurface-tension liquids including ethanol and hexane. A static oil-fouling test showed that crude oil droplets irreversibly fouled an omniphobic membrane (without a hydrophilic top layer) in water. In contrast, oil droplets placed on the Janus membrane in air were immediately desorbed upon its immersion in water. Finally, we performed direct-contact membrane distillation (MD) experiments using a crude-oil-in-saline (NaCl) water emulsion as a feed solution, simulating highly saline oily wastewater. The Janus membrane exhibited superior wetting and fouling resistances, with a stable water flux and nearly perfect salt rejection, while an omniphobic membrane failed in the desalination process. Our work highlights the great potential of antiwetting and antifouling Janus membranes for water reclamation from challenging industrial wastewaters through MD.
Omniphobic membranes are attractive for membrane distillation (MD) because of their superior wetting resistance. However, a design framework for MD membrane remains incomplete, due to the complexity of omniphobic membrane fabrication and the lack of fundamental relationship between wetting resistance and water vapor permeability. Here we present a particle-free approach that enables rapid fabrication of monolithic omniphobic membranes for MD desalination. Our monolithic omniphobic membranes display excellent wetting resistance and water purification performance in MD desalination of hypersaline feedwater containing surfactants. We identify that a trade-off exists between wetting resistance and water vapor permeability of our monolithic MD membranes. Utilizing membranes with tunable wetting resistance and permeability, we elucidate the underlying mechanism of such trade-off. We envision that our fabrication method as well as the mechanistic insight into the wetting resistance-vapor permeability trade-off will pave the way for smart design of MD membranes in diverse water purification applications.
An undulator-based vacuum ultraviolet (VUV) beamline (BL03U), intended for combustion chemistry studies, has been constructed at the National Synchrotron Radiation Laboratory (NSRL) in Hefei, China. The beamline is connected to the newly upgraded Hefei Light Source (HLS II), and could deliver photons in the 5-21 eV range, with a photon flux of 10(13) photons s(-1) at 10 eV when the beam current is 300 mA. The monochromator of the beamline is equipped with two gratings (200 lines mm(-1) and 400 lines mm(-1)) and its resolving power is 3900 at 7.3 eV for the 200 lines mm(-1) grating and 4200 at 14.6 eV for the 400 lines mm(-1) grating. The beamline serves three endstations which are designed for respective studies of premixed flame, fuel pyrolysis in flow reactor, and oxidation in jet-stirred reactor. Each endstation contains a reactor chamber, an ionization chamber where the molecular beam intersects with the VUV light, and a home-made reflectron time-of-flight mass spectrometer. The performance of the beamline and endstations with some preliminary results is presented here. The ability to detect reactive intermediates (e.g. H, O, OH and hydroperoxides) is advantageous in combustion chemistry research.
Monodisperse PtCu nanoparticles have been synthesized and can be self-assembled via adding oleylamine (OAM), and they show higher activity, stability and better CO tolerance compared with Pt/C toward the methanol oxidation reaction.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.