This prospective randomized study compared the outcome of elderly patients with an unstable pertrochanteric fracture, treated with a proximal femoral nail antirotation device (PFNA; n = 51) or a dynamic hip screw (DHS; n = 55). All patients in the DHS group and nine in the PFNA group had open reductions. Incisions were significantly shorter for the PFNA than the DHS group. Blood loss and the number of patients requiring post-operative blood transfusions were significantly greater, but operation and fluoroscopy times were significantly shorter, for the DHS versus the PFNA group. Time to mobilization with a frame was significantly shorter in the PFNA group, and post-operative complications were more common in the DHS group. Poor fracture reduction led to three revisions. All fractures in both groups united during follow-up. The PFNA allowed earlier mobilization and faster recovery than the DHS. The PFNA is a highly acceptable, minimally invasive implant for unstable fractures.

No abstract

Along with the massive use of implants in orthopaedic surgeries in recent few decades, there has been a tremendous demand for the surface modification of the implants to avoid surgery failure and improve their function. Polydopamine (PDA), being able to adhere to almost all kinds of substrates and possessing copious functional groups for covalently immobilizing biomolecules and anchoring metal ions, has been widely used for surface modification of materials since its discovery in the last decade. PDA and its derivatives can be used for the surface modification of orthopaedic implants to modulate cellular responses, including cell spreading, migration, proliferation, and differentiation, and may thereby enhance the function of existing implants. In addition, the osseointegration and antimicrobial properties of orthopaedic implants may also be improved by PDA-based coatings. The aim of this review is to provide a brief overview of current advances of surface modification technologies for orthopaedic implants using PDA and its derivatives as a medium. Given the versatility of PDA-based adhesion, such PDA-assisted surface modification technologies will certainly benefit the development of new orthopaedic implants. The translational potential of this article Surface treatments of orthopaedic implants, which are normally inert materials, are essential for their performance in vivo. This review summarizes recent advances in the surface modification of orthopaedic implants using facile and highly versatile techniques based on the use of polydopamine (PDA) and its derivatives.

No abstract

Comparing the clinical and radiographic outcomes in anterior cervical discectomy and fusion (ACDF) using a zero-profile anchored spacer (ROI-C) or a conventional cage-plate construct (CPC) for treating noncontiguous bilevel of cervical degenerative disc disease (CDDD).Overall, 46 patients with 2 noncontiguous segments of CDDD, treated with ACDF from January 2011 to October 2015, were included in this study. ROI-C was used in 22 patients (group A) and CPC in 24 patients (group B). The clinical and radiographic outcomes and complications were compared pre- and postoperatively. All patients were followed up for at least 24 months after surgery.No significant difference was found in fusion rate, cervical curvature, height of fused segment (FSDH), intraoperative blood loss, and Japanese Orthopaedic Association (JOA), and Neck Disability Index (NDI) scores between the 2 groups. Group A had a shorter operation time and significantly lower incidence of dysphagia (3 and 24 months postoperatively) than group B (P < .001 and P < .05, respectively). Moreover, group A had a higher loss of FSDH than group B, but with no difference between the 2 groups (P > .05). Two cages developed subsidence in group A (4.5%) and 2 adjacent levels developed degeneration in group B (2,8%).ACDF with ROI-C device was superior to CPC for noncontiguous bilevel of CDDD because it avoided postoperative dysphagia and required a shorter operation time. Moreover, the clinical outcomes were comparable. Prospective trials with larger samples and longer follow-up are required to confirm the results.

The introduction of a material able to promote osteogenesis and remodelling activity in a clinically relevant time frame in vertebroplasty and kyphoplasty procedures may have patient benefit. We report the in-vivo performance of a biphasic synthetic bone graft material (Genex Paste, Biocomposites, UK) [test material], composed of calcium sulfate and β-tricalcium phosphate, implanted into a sheep vertebral defect model. Cavities drilled into 4 adjacent vertebrae (L2 to L5) of 24 skeletally mature sheep were; (1) filled with the test material; (2) filled with commercially available polymethylmethacrylate [PMMA] cement; (3) remained empty [sham]. Analysis was performed immediately after implantation and at 8, 16, and 36 weeks post implantation. Sites were evaluated for bone growth with microCT analysis, histological examination, and mechanical testing under compression. The test material exhibited an improved tissue response over the PMMA, indicating a superior biological tolerance. MicroCT and histology indicated marked osteoregenerative capacity of the test material when compared with sham and the PMMA. The percentage of new bone formation was higher for the test material than sham at 16 and 36 weeks post implantation, with bone regeneration almost complete at 36 weeks in this group. Resorption of test material and the integration into new bone tissue were demonstrated. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2012.

No abstract

No abstract