Although the structure and function of cellulase systems continue to be the subject of intense research, it is widely acknowledged that the rate and extent of the cellulolytic hydrolysis of lignocellulosic substrates is influenced not only by the effectiveness of the enzymes but also by the chemical, physical and morphological characteristics of the heterogeneous lignocellulosic substrates. Although strategies such as site-directed mutagenesis or directed evolution have been successfully employed to improve cellulase properties such as binding affinity, catalytic activity and thermostability, complementary goals that we and other groups have studied have been the determination of which substrate characteristics are responsible for limiting hydrolysis and the development of pretreatment methods that maximize substrate accessibility to the cellulase complex. Over the last few years we have looked at the various lignocellulosic substrate characteristics at the fiber, fibril and microfibril level that have been modified during pretreatment and subsequent hydrolysis. The initial characteristics of the woody biomass and the effect of subsequent pretreatment play a significant role on the development of substrate properties, which in turn govern the efficacy of enzymatic hydrolysis. Focusing particularly on steam pretreatment, this review examines the influence that pretreatment conditions have on substrate characteristics such as lignin and hemicellulose content, crystallinity, degree of polymerization and specific surface, and the resulting implications for effective hydrolysis by cellulases.

No abstract

Twenty-one organosolv ethanol lignin samples were prepared from hybrid poplar (Populus nigra xP. maximowiczii) under varied conditions with an experimental matrix designed using response surface methodology (RSM). The lignin preparations were evaluated as potential antioxidants. Results indicated that the lignins with more phenolic hydroxyl groups, less aliphatic hydroxyl groups, low molecular weight, and narrow polydispersity showed high antioxidant activity. Processing conditions affected the functional groups and molecular weight of the extracted organosolv ethanol lignins, and consequently influenced the antioxidant activity of the lignins. In general, the lignins prepared at elevated temperature, longer reaction time, increased catalyst, and diluted ethanol showed high antioxidant activity. Regression models were developed to enable the quantitative prediction of lignin characteristics and antioxidant activity based on the processing conditions.

No abstract

Pulps with residual lignin ranging from 6.4-27.4% (w/w) were prepared from mixed softwoods using a proprietary biorefining technology (the Lignol process) based on aqueous ethanol organosolv extraction. The pulps were evaluated for bioconversion using enzymatic hydrolysis of the cellulose fraction to glucose and subsequent fermentation to ethanol. All pulps were readily hydrolyzed without further delignification. More than 90% of the cellulose in low lignin pulps (< or =18.4% residual lignin) was hydrolyzed to glucose in 48 h using an enzyme loading of 20 filter paper units/g cellulose. Cellulose in a high lignin pulp (27.4% residual lignin) was hydrolyzed to >90% conversion within 48 h using 40 filter paper units/g. The pulps performed well in both sequential and simultaneous saccharification and fermentation trials indicating an absence of metabolic inhibitors. Chemical and physical analyses showed that lignin extracted during organosolv pulping of softwood is a suitable feedstock for production of lignin-based adhesives and other products due to its high purity, low molecular weight, and abundance of reactive groups. Additional co-products may be derived from the hemicellulose sugars and furfural recovered from the water-soluble stream.