Herein, the effect of heat treatment with die quenching on Zn‐coated hot stamping steel is analyzed. Heating temperatures are 850, 880, 900, and 930 °C, and soaking times are 4 and 8 min. Then, microstructure, hardness, coating layer morphology, element diffusion and distribution, formation of microcrack and microvoid, and oxidation are analyzed. Results reveal that as heating temperature increases, the Vickers hardness of Zn‐coated hot stamping steel increases when soaking time is 4 min, while it decreases when soaking time is 8 min. The least average hardness value is still larger than 460, resulting from the formation of the martensitic phase. The diffusion tends to be significant as heating temperature and soaking time increase. Both the diffusion and the evaporation affect the thickness of the coating layer remarkably. The average layer thickness is at least 18.2 μm. Microcrack generates in the coating layer due to different thermal expansions between substrate and coating layer and the melting of Zn or Zn–Fe binary phase with high content of Zn. Microvoid forms in the coating layer, resulting from the Kirkendall effect and oxidation of the Zn element. Moreover, with the increase in heating temperature and soaking time, Fe2O3 is also generated on the coating surface along with ZnO.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.