Cross-laminated timber (CLT) is an innovative engineered timber product and has been widely used for constructing tall timber buildings due to its excellent structural performance and good strength with its multi-layers of boards in both perpendicular directions. However, the global serviceability performance of tall timber buildings constructed from CLT products for the lift core, walls, and floors under wind load is not well known yet, even though it is crucial in a design. In this study, the finite element software SAP2000 is used to numerically simulate the global static and dynamic serviceability behaviours of a 30-storey tall CLT building assumed in Glasgow, Scotland, UK. The maximum horizontal storey displacement due to wind is only 16.6% of the design limit and the maximum global horizontal displacement is only 13.8% of the limit set to the Eurocodes. The first three lowest vibrational frequencies, modes and shapes were obtained, with the fundamental frequency being 19.9% larger than the code-recommended value. Accordingly, the peak acceleration of the building due to wind was determined as per the Eurocodes and ISO standard. The results show that the global serviceability behaviours of the building satisfy the requirements of the Eurocodes and other design standards. Parametric studies on the peak accelerations of the tall CLT building were also conducted by varying the timber material properties and building masses. By increasing the timber grade for CLT members, the generalised building mass and the generalised building stiffness can all be adopted to lower the peak accelerations at the top level of the building, so as to reduce human perceptions of the wind-induced vibrations with respect to the peak acceleration.
In order to solve the problem of pitting corrosion discrimination of rolling element bearing on vibrating screen. We established the vibrating model of pitting corrosion of rolling element bearing inner and outer rings faults on vibrating screen based on rotating machinery rolling element bearings operating mechanism and Hertz contact theory. We simulate this model and analyze the results. The results show that, when the outer ring of the rolling element bearing of vibrating screen has multi-point pitting corrosion, there is an apparent modulation phenomenon at the response amplitude. When the inner ring of the rolling element bearing of vibrating screen has multi-point pitting corrosion, there is a slight modulation phenomenon at the response amplitude.
Glued-laminated timber (Glulam) is an innovative engineered timber product and has been widely used for constructing spatial grand timber structures and tall timber buildings due to its exceptional natural attraction, easy processing, decent fire resistance and outstanding structural performance. However, global serviceability performances of tall timber buildings constructed from Glulam products for beams, columns and bracings and CLT products for lift core and floors under wind load are not well known yet though they are crucial in structural design and global analysis. In this study, finite element software SAP2000 is used to numerically simulate the global static and dynamic serviceability behaviours of a 105 m high 30-storey tall Glulam building with CLT lift core and floors assumed in Glasgow, Scotland, UK. The maximum horizontal storey displacement due to wind is 58.5% of the design limit and the maximum global horizontal displacement is 49.7% of the limit set to the Eurocodes. The first three lowest vibrational frequencies, modes and shapes of the building are obtained, with the fundamental frequency being 33.3% smaller than the code recommended value due to its low mass and stiffness. The peak acceleration of the building due to wind is determined to the Eurocodes and ISO 10137. The results show that the global serviceability behaviours of the building satisfy the requirements of the Eurocodes and other design standards. Parametric studies on the peak accelerations of the tall Glulam building are also conducted by varying timber material properties and building masses. Increasing the timber grade for CLT members, the generalised building mass and the generalised building stiffness can all be adopted to lower the peak accelerations at the top level of the building so as to reduce the human perceptions to the wind induced vibrations with respect to the peak acceleration.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.