The discovery of a record high figure of merit (ZT) of ≈2.6 associated with bulk SnSe has stimulated considerable enthusiasm in searching for 2D systems with similar high ZT. However, previously reported 2D thermoelectric (TE) materials generally possess very low ZT due to the high lattice thermal conductivity (κ L ) and/or small power factor (PF). Herein, a very high ZT (≈2.08) value associated with atomically thin 2D KAgSe nanosheet is reported, which also exhibits an unprecedented low intrinsic κ L (≈0.03 Wm −1 K −1 at 700 K for trilayer) and fairly large PF. The low κ L mainly stems from the high lattice anharmonicity induced by both the "interfacial shear slip" vibrations and the asymmetric "AgSe pair" vibrations from distorted AgSe 4 tetrahedrons. Meanwhile, the complete band-extrema alignment and coexistence of heavy and light bands result in an optimal Seebeck coefficient and electrical conductivity, thereby a large PF. This work suggests not only an alternative way to acquiring high lattice anharmonicity but also a highly competitive 2D TE candidate for wide applications.The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10.1002/adfm.202001200.devices, recently much attention has been devoted to the development of 2D highefficiency TE materials with controllable thickness. [5][6][7] In general, the TE efficiency is characterized by the dimensionless figure of merit ZT = S 2 σT/(κ L + κ e ), where S, σ, T, κ L , and κ e are Seebeck coefficient, electrical conductivity, absolute temperature, lattice thermal conductivity and electronic thermal conductivity, respectively. Apparently, the high TE efficiency can be achieved by increasing the power factor (PF = S 2 σ) together with suppressing the sum of thermal conductivity (κ L + κ e ).Currently, the TE efficiency can be improved by two approaches: i) Tuning effective mass to improve the electronic transport and ii) increasing phonon scattering to suppress the lattice thermal transport. [8][9][10][11] For a given carrier concentration, a large carrier effective mass (m*) contributes to a large S, and the m* is proportional to the band effective mass (m b *) according to m* = N V 2/3 m b *, where N V refers to the band degeneracy. [10,12] A large m b *, however, will reduce the carrier mobility μ since m b 1/ * 2 µ ∝ (2D systems). [13][14][15][16] Hence, to optimize S 2 σ, it is important to attain high N V and moderate m b * simultaneously. A high N V can be achieved either by mixing two types of low-symmetric compounds into a reconstructed highly symmetric structure or by alloying/doping to converge different bands in the Brillouin zone. [8,[17][18][19] For electronic bands at the band edge, a moderate m b * can be realized in principle through element doping or strain engineering. [20] However, in practice, many compounds have limited doping capability and are easily damaged by strain; and the crystal symmetry of the reconstructed structure is uncontrollable. Regarding increasing phonon scattering, intro...

Bi2OS2 nanosheets possess tunable anomalous layer-dependent bandgaps, derived from the synergetic effect of the quantum confinement and surface electron states.

Two-dimensional (2D) thermoelectrics (TE) with high figure of merit (ZT > 2) is the core of the development of advanced energy technology. However, such a high ZT has never been...

No abstract