this paper describes the main characteristics of bottom blowing argon, and by comparing forging adopting the mode of bottom blowing argon process of forging with not using the technology of forging the same time and the same kind of shape of ingot production the same in the forging crack, the results of the ultrasonic flaw detection, grain size, mechanical properties, gas content in liquid steel, the influence of the mold bottom blowing argon through the comparative analysis on the influence of the inclusions, the method of die bottom blowing argon can improve the quality of steel, It is worth promoting. And the principium of die bottom blowing argon is discussed.
According to the typical large-diameter thick-walled steel T/P91 (10Cr9Mo1VNb), during the hot working, there are dynamic recrystallization and grain growth. The influence of the samples at different hot treatment on the grain size and grain growth rate were obtained by the statistics of the grain size, The grain growth index under various heat treatment were compared, the mathematical model of the austenite grain growth law of P91 alloy steel was established.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.