A simple and scalable method is developed to synthesize TiO(2)/graphene nanostructured composites as high-performance anode materials for Li-ion batteries using hydroxyl titanium oxalate (HTO) as the intermediate for TiO(2). With assistance of a surfactant, amorphous HTO can condense as a flower-like nanostructure on graphene oxide (GO) sheets. By calcination, the HTO/GO nanocomposite can be converted to TiO(2)/graphene nanocomposite with well preserved flower-like nanostructure. In the composite, TiO(2) nanoparticles with an ultrasmall size of several nanometers construct the porous flower-like nanostructure which strongly attached onto conductive graphene nanosheets. The TiO(2)/graphene nanocomposite is able to deliver a capacity of 230 mA h g(-1) at 0.1 C (corresponding to a current density of 17 mA g(-1)), and demonstrates superior high-rate charge-discharge capability and cycling stability at charge/discharge rates up to 50 C in a half cell configuration. Full cell measurement using the TiO(2)/graphene as the anode material and spinel LiMnO(2) as the cathode material exhibit good high-rate performance and cycling stability, indicating that the TiO(2)/graphene nanocomposite has a practical application potential in advanced Li-ion batteries.

A 3D porous architecture of Si/graphene nanocomposite has been rationally designed and constructed through a series of controlled chemical processes. In contrast to random mixture of Si nanoparticles and graphene nanosheets, the porous nanoarchitectured composite has superior electrochemical stability because the Si nanoparticles are firmly riveted on the graphene nanosheets through a thin SiO x layer. The 3D graphene network enhances electrical conductivity, and improves rate performance, demonstrating a superior rate capability over the 2D nanostructure. This 3D porous architecture can deliver a reversible capacity of $900 mA h g À1 with very little fading when the charge rates change from 100 mA g À1 to 1 A g À1 . Furthermore, the 3D nanoarchitechture of Si/graphene can be cycled at extremely high Li + extraction rates, such as 5 A g À1 and 10 A g À1 , for over than 100 times. Both the highly conductive graphene network and porous architecture are considered to contribute to the remarkable rate capability and cycling stability, thereby pointing to a new synthesis route to improving the electrochemical performances of the Si-based anode materials for advanced Li-ion batteries.

No abstract