This paper describes the stabilization of compressor surge by an active method. It is known that surge follows when small disturbances grow in an unstable compression system, and that small growth can be modelled through a linear stability analysis. An active element is here introduced to counter any tendency to instability and the control law governing the active stabilizer is determined from linear theory. We follow precisely the suggestion put forward by Epstein et al. (1986) and verify that their theory conforms to practice. The theory is verified in an experiment on a compression system whose plenum volume is controlled. Suppression of the flow instability was achieved by switching on the controller and the compressor was made to operate stably on a part of its characteristic beyond the nature stall line. Furthermore the controlled compressor is much more resilient to external disturbances than is the natural case. The controller is even effective on deep surge – a feature of great interest but hardly predictable from the Epstein et al. initiative for this kind of study.

No abstract

Transition metal chalcogenides (TMCs) are a large family of 2D materials that are currently attracting intense interest. TMCs with 3d transition metals provide opportunities for introducing magnetism and strong correlations into the material with manganese standing out as a particularly attractive option due to its large magnetic moment. Here we report on the successful synthesis of monolayer manganese selenide on a NbSe 2 substrate. Using scanning tunneling microscopy and spectroscopy experiments and global structure prediction calculations at the density functional theory level, we identify the atomic structure and magnetic and electronic properties of the layered Mn 2 Se 2 phase. The structure is similar to the layered bulk phase of CuI or a buckled bilayer of h -BN. Interestingly, our results suggest that the monolayer is antiferromagnetic, but with an unusual out-of-plane ordering that results in two ferromagnetic planes.

Modes attenuation of the tube lattice fiber (TLF) is characterized by D/λ, where D is the core diameter and λ is the wavelength. Hence, the TLF is structured with a large core to ensure a low attenuation loss. A small core, on the other hand, facilitates the gas-filled TLF applications, but at the expense of the increased mode attenuation. We show that adding a second cladding layer to the conventional one layer TLF (1TLF) can resolve the contradicting requirements. The mode attenuation of TLF with two cladding layers (2TLF) is less influenced by the D/λ value as compared to 1TLF, thus realizing a low loss small core TLF. Furthermore, we found that adding the second layer brings another advantage to a bending performance. With a determined core size, D, a 1TLF with smaller capillary hole size, d, experiences less bending loss. However, the reduced d increases the confinement loss that counteracts the bending loss improvement. This confliction is substantially alleviated in 2TLF thanks to the second cladding layer. Theoretical investigations and experimental demonstrations are presented to evidence the important role of the second cladding ring in the TLF, which has been overlooked in prior studies.

Transmission electron microscopy of the amorphization of copper indium diselenide by in situ ion irradiation J. Appl. Phys. 111, 053510 (2012) Diffusion-controlled formation mechanism of dual-phase structure during Al induced crystallization of SiGe Appl. Phys. Lett. 100, 071908 (2012) Local structure of nitrogen in N-doped amorphous and crystalline GeTe Appl. Phys. Lett. 100, 061910 (2012) Facile creation of bio-inspired superhydrophobic Ce-based metallic glass surfaces Appl. Phys. Lett. 99, 261905 (2011) Unexpected short-and medium-range atomic structure of sputtered amorphous silicon upon thermal annealing J. Appl. Phys. 110, 096104 (2011) Additional information on J. Appl. Phys. Specially designed plate-impact experiments have been conducted on a Zr-based amorphous alloy using a single-stage light gas gun. To understand the microdamage nucleation process in the material, the samples are subjected to dynamic tensile loadings of identical amplitude ($ 3.18 GPa) but with different durations (83-201 ns). A cellular pattern with an equiaxed shape is observed on the spallation surface, which shows that spallation in the tested amorphous alloy is a typical ductile fracture and that microvoids have been nucleated during the process. Based on the observed fracture morphologies of the spallation surface and free-volume theory, we propose a microvoid nucleation model of bulk amorphous alloys. It is found that nucleation of microvoids at the early stage of spallation in amorphous alloys results from diffusion and coalescence of free volume, and that high mean tensile stress plays a dominant role in microvoid nucleation.

No abstract

No abstract

The development of non-precious, high-performance and environmentally friendly wide band gap semiconductor composite photocatalysts is highly desirable. Here we report two-dimensional (2D) GaN/SiC-based multilayer van der Waals heterostructures for hydrogen...