We report on the generation of passive harmonic mode locking of a fiber laser using a microfiber-based topological insulator (TI) Bi(2)Te(3) saturable absorber (SA). The optical deposition method was employed to fabricate the microfiber-based TISA. By virtue of the excellent nonlinear optical property of the proposed TISA, the fiber laser could operate at the pulse repetition rate of 2.04 GHz under a pump power of 126 mW, corresponding to the 418th harmonic of fundamental repetition frequency. The results demonstrate that the microfiber-based TI photonic device can operate as both the high nonlinear optical component and the SA in fiber lasers, and could also find other applications in the related fields of photonics.

Abstract:We reported on the generation of femtosecond pulse in an anomalous-dispersion fiber ring laser by using a polyvinyl alcohol (PVA)-based Topological Insulator (TI), Bi 2 Se 3 saturable absorber (SA). The PVA-TI composite has a low saturable optical intensity of 12 MW/cm 2 and a modulation depth of ~3.9%. By incorporating the fabricated PVA-TISA into a fiber laser, mode-locking operation could be achieved at a low pump threshold of 25 mW. After an optimization of the cavity parameters, optical pulse with ~660 fs centered at 1557.5 nm wavelength had been generated. The experimental results demonstrate that the PVA could be an excellent host material for fabricating

β-(AlxGa1−x)2O3/β-Ga2O3 heterostructures were grown via plasma-assisted molecular beam epitaxy. The β-(AlxGa1−x)2O3 barrier was partially doped by Ge to achieve a two-dimensional electron gas (2DEG) in Ga2O3. The formation of the 2DEG was confirmed by capacitance–voltage measurements. The impact of Ga-polishing on both the surface morphology and the reduction of the unintentionally incorporated Si at the growth interface was investigated using atomic force microscopy and secondary-ion mass spectrometry. Modulation doped field-effect transistors were fabricated. A maximum current density of 20 mA/mm with a pinch-off voltage of −6 V was achieved on a sample with a 2DEG sheet charge density of 1.2 × 1013 cm−2.

No abstract

We reported on the generation of high-order harmonic mode-locking in a fiber laser using a microfiber-based molybdenum disulfide (MoS(2)) saturable absorber (SA). Taking advantage of both the saturable absorption and large third-order nonlinear susceptibilities of the few-layer MoS(2), up to 2.5 GHz repetition rate HML pulse could be obtained at a pump power of 181 mW, corresponding to 369th harmonic of fundamental repetition frequency. The results provide the first demonstration of the simultaneous applications of both highly nonlinear and saturable absorption effects of the MoS(2), indicating that the microfiber-based MoS(2) photonic device could serve as high-performance SA and highly nonlinear optical component for application fields such as ultrafast nonlinear optics.