Aquaculture coasts have become widely distributed in coastal zones as human activities are intensified. Due to the complexity in this type of coast, it is difficult to extract the coastline with traditional automated mapping approaches. In this paper, we present an automated method-object-based region growing integrating edge detection (OBRGIE) for the extraction of this type of coastline. In this method, a new object feature named OMI (object merging index) is proposed to separate land and sea. The OBRGIE method was applied to Landsat Thematic Mapper (TM) (pixel size 30m) and Satellite Pour l'Observation de la Terre (SPOT-5) (pixel size 10 m) images of two coastal segments with lengths of 272.7 km and 35.5 km respectively, and the accuracy of the extracted coastlines was assessed in comparison with the manually delineated coastlines. The mean and RMSE (root mean square error) are 16.0 m and 16.4 m respectively for the TM images, and 8.0 m and 8.6 m, respectively, for the SPOT-5 images, indicating that the proposed method derives coastlines with pixel accuracy. The OBRGIE method is also found to be robust to the segmentation scale parameter, and the OMI feature is much more effective than the spectral attribute in separating land and sea in aquaculture coasts. This method may provide an inexpensive means of fast coastline mapping from remotely sensed imagery with relatively fine-to-moderate spatial resolution in coastal sectors with intense human interference.

No abstract

A simple and efficient method of thinning graphene with an accuracy of a single layer is proposed, which includes mild nitrogen plasma irradiation and annealing in Ar/O2. On the basis of our data, plasma irradiation induces damages in the top-layer graphene and the annealing removes the damaged layer by fast oxidation. The process was used to turn bilayer graphene into monolayer as well as thin multilayer graphene layer-by-layer via repeated utilization. Combined with electron beam lithography, patterns were fabricated by selectively removing graphene planes. The thinned graphene possesses good quality verified by atomic force microscopic investigation and Raman analysis. The process presented here offers a very useful post-synthesis manipulation of graphene thickness, which may find important applications for graphene-based device fabrication.

Land cover changes in tropical rainforest climate zones play an important role in global climate change and the functioning of the Earth’s natural system. Existing research on the consistency of different land cover products has mainly focused on administrative divisions (continental or national scales). However, the ongoing production of large regional or global land cover products with higher resolutions requires us to have a better grasp of confusing land types and their geographical locations for different zoning (e.g., geographical zoning) in order to guide the optimization of strategies such as zoning and sample selection in automated land cover classification. Therefore, we selected the GlobeLand30-2010, GLC_FCS30-2015, and FROM_GLC2015 global land cover products with a 30-m resolution covering Indonesia, which has a tropical rainforest climate, as a case study, and then analyzed these products in terms of areal consistency, spatial consistency, and accuracy evaluation. The results revealed that (a) all three land cover products revealed that forest is the main land cover type in Indonesia. The area correlation coefficient of any two products is better than 0.89; (b) the areas that are completely consistent among the three products account for 58% of the total area of Indonesia, mainly distributed in the central and northern parts of Kalimantan and Papua, which are dominated by forest land types. The spatial consistency of the three products is low, however, due to the complex surface types and staggered distributions of grassland, shrub, cultivated land, artificial surface, and other land cover types in Java, eastern Sumatra, and the eastern, southern, and northwestern sections of Kalimantan, where the elevation is less than 200 m. Given these results, land cover producers should take heed of the classification accuracy of these areas; (c) the absolute accuracy evaluation demonstrated that the GLC_FCS30-2015 product has the highest overall accuracy (65.59%), followed by the overall accuracy of the GlobeLand30-2010 product (61.65%), while the FROM_GLC2015 exhibits the lowest overall accuracy (57.71%). The mapping accuracy of the three products is higher for forests and artificial surfaces. The cropland mapping accuracy of the GLC_FCS30-2015 product is higher than those of the other two products. The mapping accuracy of all products is low for grassland, shrubland, bareland, and wetland. The classification accuracy of these land cover types requires further improvement and cannot be used directly by land cover users when conducting relevant research in tropical rainforest climate zones, since the utilization of these products could lead to serious errors.

The spatial distribution of population is closely related to land use and land cover (LULC) patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS) have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS) is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B) data integrated with a Pattern Decomposition Method (PDM) and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM). The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable.

As a valuable resource in coastal areas, coastlines are not only vulnerable to natural processes such as erosion, siltation, and disasters, but are also subjected to strong pressures from human processes such as urban growth, resource development, and pollution discharge. This is especially true for reef nations with rich coastline resources and a large population, like Indonesia. The technical joint of remote sensing (RS) and geographic information system (GIS) has significant advantages for monitoring coastline changes on a large scale and for quantitatively analyzing their change mechanisms. Indonesia was taken as an example in this study because of its abundant coastline resources and large population. First, Landsat images from 1990 to 2018 were used to obtain coastline information. Then, the index of coastline utilization degree (ICUD) method, the changes in land and sea patterns method, and the ICUD at different scales method were used to reveal the spatiotemporal change pattern for the coastline. The results found that: (1) Indonesia’s total coastline length has increased by 777.40 km in the past 28 years, of which the natural coastline decreased by 5995.52 km and the artificial coastline increased by 6771.92 km. (2) From the analysis of the island scale, it was known that the island with the largest increase in ICUD was Kalimantan, at the expense of the mangrove coastline. (3) On the provincial scale, the province with the largest change of ICUD was Sumatera Selatan Province, which increased from 100 in 1900 to 266.43 in 2018. (4) The change trend of the land and sea pattern for the Indonesian coastline was mainly expanded to the sea. The part that eroded to the land was relatively small; among which, Riau Province had the most significant expansion of land area, about 177.73 km2, accounting for 23.08% of the increased national land area. The worst seawater erosion was in the Jawa Barat Province. Based on the analysis of population and economic data during the same period, it was found that the main driving mechanism behind Indonesia’s coastline change was population growth, which outweighed the impact of economic development. However, the main constraint on the Indonesian coastline was the topographic factor. The RS and GIS scheme used in this study can not only provide support for coastline resource development and policy formulation in Indonesia, but also provide a valuable reference for the evolution of coastline resources and environments in other regions around the world.

No abstract

No abstract