No abstract

Mg and its alloys are the lightest structural metals available and are extremely attractive for applications as lightweight components, particularly in the automobile, electronic, and aerospace industries. The global market for wrought Mg alloys has steadily expanded over the past decade. And numerous studies have been carried out to meet this increasing demand of high-performance Mg alloys. However, Mg extrusion alloys have had a very limited usage so far. To overcome existing industrial challenges, one desirable approach is the development of low-cost rare earth (RE) free Mg extrusion alloys with superior mechanical properties. This review will introduce the recent research highlights in the extrusion of Mg alloys, specifically focusing on low-cost RE-free Mg alloy. The results from both the literature and our previous study are summarized and critically reviewed. Several aspects of RE-free Mg extrusion alloys are described in detail: (1) novel alloying designs including Mg-Al-, Mg-Zn-, Mg-Ca-, Mg-Sn-, and Mg-Bi-based alloys, (2) advanced extrusion techniques, and (3) extrusion-related severe plastic deformation (SPD) processing. Accordingly, considering the large gap in mechanical properties between the current RE-free Mg alloys and high-performance aluminum alloys, new alloy design, processing route control, and recommendations for future research on RE-free Mg extrusion alloys are also proposed. We hope this review will not only offer insightful information regarding the extrusion of RE-free Mg alloys but also inspire the development of new Mg extrusion technologies.

A Mg-1.32Bi-0.72Ca (BX11) alloy having bimodal grain structure was successfully prepared by a novel processing route of combining extrusion and three-pass caliber rolling. The first extruded and then caliber-rolled (E-CRed) alloy demonstrates a necklace-like grain structure with ultrafine grains formed around the microscale deformed grains, which is remarkably different from the uniform microstructure of the as-extruded alloy. In addition, the E-CRed BX11 alloy exhibits strong basal texture which is mainly original from the microscale deformed grains. Furthermore, the E-CRed BX11 alloy demonstrates excellent comprehensive mechanical properties, with an ultra-high yield strength of 351 MPa and a good elongation to failure of 13.2%. The significant strength improvement can be mainly attributed to the significant grain refinement and much stronger basal texture compared with the as-extruded sample.

No abstract

The domain Archaea is a key research model for gaining insights into the origin and evolution of life, as well as the relevant biogeochemical processes. The discovery of nanosized DPANN archaea has overthrown many aspects of microbiology.