The fabrication of highly durable skin‐mimicking sensors remains challenging because of the unavoidable fatigue and physical damage that sensors are subjected to in practical applications. In this study, ultra‐durable ionic skins (I‐skins) with excellent healability and high sensitivity are fabricated by impregnating ionic liquids (ILs) into a mechanically robust poly(urea‐urethane) (PU) network. The PU network is composed of crystallized poly(ε‐caprolactone) and flexible poly(ethylene glycol) that are dynamically cross‐linked with hindered urea bonds and hydrogen bonds. Such a design endows the resultant ionogels with high mechanical strength, good elasticity, Young's modulus similar to that of natural skin, and excellent healability. The ionogel‐based I‐skins exhibit a high sensitivity to a wide range of strains (0.1–300%) and pressures (0.1–20 kPa). Importantly, the I‐skins show a highly reproducible electrical response over 10 000 uninterrupted strain cycles. The sensing performance of the I‐skins stored in open air for 200 days is almost the same as that of the freshly prepared I‐skin. The fractured I‐skins can be easily healed by heating at 65 °C that restores their original ultra‐durable sensing performance. The long‐term durability of the I‐skins is attributed to the combination of non‐volatility of the ILs, excellent healability, and well‐designed mechanical properties.

Spider silk is one of the most robust natural materials, which has extremely high strength in combination with great toughness and good elasticity. Inspired by spider silk but beyond it, a healable and recyclable supramolecular elastomer, possessing superhigh true stress at break (1.21 GPa) and ultrahigh toughness (390.2 MJ m−3), which are, respectively, comparable to and ≈2.4 times higher than those of typical spider silk, is developed. The elastomer has the highest tensile strength (ultimate engineering stress, 75.6 MPa) ever recorded for polymeric elastomers, rendering it the strongest and toughest healable elastomer thus far. The hyper‐robust elastomer exhibits superb crack tolerance with unprecedentedly high fracture energy (215.2 kJ m−2) that even exceeds that of metals and alloys, and superhigh elastic restorability allowing dimensional recovery from elongation over 12 times. These extraordinary mechanical performances mainly originate from the meticulously engineered hydrogen‐bonding segments, consisting of multiple acylsemicarbazide and urethane moieties linked with flexible alicyclic hexatomic spacers. Such hydrogen‐bonding segments, incorporated between extensible polymer chains, aggregate to form geometrically confined hydrogen‐bond arrays resembling those in spider silk. The hydrogen‐bond arrays act as firm but reversible crosslinks and sacrificial bonds for enormous energy dissipation, conferring exceptional mechanical robustness, healability, and recyclability on the elastomer.

Herein we report a self-cleaning coating derived from zwitterionic poly(2-methacryloyloxylethyl phosphorylcholine) (PMPC) brushes grafted on a solid substrate. The PMPC surface not only exhibits complete oil repellency in a water-wetted state (i.e., underwater superoleophobicity), but also allows effective cleaning of oil fouled on dry surfaces by water alone. The PMPC surface was compared with typical underwater superoleophobic surfaces realized with the aid of surface roughening by applying hydrophilic nanostructures and those realized by applying smooth hydrophilic polyelectrolyte multilayers. We show that underwater superoleophobicity of a surface is not sufficient to enable water to clean up oil fouling on a dry surface, because the latter circumstance demands the surface to be able to strongly bond water not only in its pristine state but also in an oil-wetted state. The PMPC surface is unique with its described self-cleaning performance because the zwitterionic phosphorylcholine groups exhibit exceptional binding affinity to water even when they are already wetted by oil. Further, we show that applying this PMPC coating onto steel meshes produces oil-water separation membranes that are resilient to oil contamination with simply water rinsing. Consequently, we provide an effective solution to the oil contamination issue on the oil-water separation membranes, which is an imperative challenge in this field. Thanks to the self-cleaning effect of the PMPC surface, PMPC-coated steel meshes can not only separate oil from oil-water mixtures in a water-wetted state, but also can lift oil out from oil-water mixtures even in a dry state, which is a very promising technology for practical oil-spill remediation. In contrast, we show that oil contamination on conventional hydrophilic oil-water separation membranes would permanently induce the loss of oil-water separation function, and thus they have to be always used in a completely water-wetted state, which significantly restricts their application in practice.

In this report, we demonstrate a rapid and simple seeded growth method for synthesizing monodisperse, quasi-spherical, citrate-stabilized Au nanoparticles (Au NPs) via H(2)O(2) reduction of HAuCl(4). Au NPs with diameter ranging from 30 to 230 nm can be synthesized by simply adding 12 nm citrate stabilized Au NP seeds to an aqueous solution of H(2)O(2) and HAuCl(4) under ambient conditions. The diameter of the resulting Au NPs can be quantitatively controlled by the molar ratio of HAuCl(4) to the Au seeds. The standard deviation of the Au NP sizes is less than 10%, and the ellipticity (ratio of major to minor axes) of the NPs is less than 1.1. Compared to existing ones, the present seeded growth approach is implemented within 1 min under ambient condition, and no unfavorable additives are involved because H(2)O(2) can readily decompose into H(2)O during storage or via boiling.

To build a sustainable society, it is of significant importance but highly challenging to develop remalleable, healable, and biodegradable polymeric materials with integrated high strength and high toughness. Here, we report a superstrong and ultratough sustainable supramolecular polymeric material with a toughness of ca. 282.3 J g −1 (395.2 MJ m −3 ) in combination with a tensile strength as high as ca. 104.2 MPa and a Young's modulus of ca. 3.53 GPa. The toughness is even higher than that of the toughest spider silk (ca. 354 MJ m −3 ) ever found in the world, while the material also exhibits a superior tensile strength over most engineering plastics. This material is fabricated by topological confinement of the biodegradable linear polymer of poly(vinyl alcohol) (PVA) via the naturally occurring dendritic molecules of tannic acid (TA) based on high-density hydrogen bonds. Simply blending TA and PVA in aqueous solutions at acidic conditions leads to the formation of TA−PVA complexes as precipitates, which can be processed into dry TA−PVA composite products with desired shapes via the compression molding method. Compared to the conventional solution casting method for the fabrication of PVA-based thin films, the as-developed strategy allows large-scale production of bulk TA−PVA composites. The TA−PVA composites consist of interpenetrating three-dimensional supramolecular TA−PVA clusters. Such a structural feature, revealed by computational simulations, is crucial for the integrated superhigh strength and ultrahigh toughness of the material. The biodegradable TA−PVA composites are remalleable for multiple generations of recycling and healable after break, at room temperature, by the assistance of water to activate the reversibility of the hydrogen bonds. The TA−PVA composites show high promise as sustainable substitutes for conventional plastics because of their remalleability, healability, and biodegradability. The integrated superhigh strength and ultrahigh toughness of the TA−PVA composites ensure their high reliability and broad applicability.