Abstract:Nighttime light imagery offers a unique view of the Earth's surface. In the past, the nighttime light data collected by the DMSP-OLS sensors have been used as an efficient means to correlate regional and global socio-economic activities. With the launch of the Suomi National Polar-orbiting Partnership (Suomi-NPP) satellite in 2011, the day-night band (DNB) of the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard represents a major advancement in nighttime imaging capabilities, because it surpasses its predecessor DMSP-OLS in radiometric accuracy, spatial resolution and geometric quality. In this paper, four variables (total night light, light area, average night light and log average night light) are extracted from nighttime radiance data observed by the VIIRS-DNB composite in 2013 and nighttime digital number (DN) data from the DMSP-OLS stable dataset in 2012, respectively, and correlated with 12 socio-economic parameters at the provincial level in mainland China during the corresponding period. Background noise of DNB composite data is removed using either a masking method or an optimal threshold method. In general, the correlation of these socio-economic data with the total night light and light area of VIIRS-DNB composite data is better than with the DMSP-OLS stable data. The correlations between total night light of denoised DNB composite data and built-up area, gross regional product (GRP) and power consumption are higher than 0.9 and so are the correlations between the light area of denoised DNB composite data and city and town population, built-up area, GRP, power consumption and waste water discharge. However, the correlations of socio-economic data with the average night light and log average night light of VIIRS-DNB composite data are not as good as with the DMSP-OLS stable data. To quantitatively analyze the reasons for the correlation difference, a cubic regression method is developed to correct the saturation effect of the DMSP stable data, and we artificially convert the pixel value of the DNB composite into six bits to match the DMSP stable data format. The correlation results between the processed data and socio-economic data show that the effects of saturation and quantization are two of the reasons for the correlation difference. Additionally, on this basis, we estimate the total night light ratio between saturation-corrected DMSP stable data and finite quantization DNB composite data, and it is found that the ratio is~11.28˘4.02 for China. Therefore, it appears that a different acquisition time is the other reason for the correlation difference.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract

SUMMARYLarge deformations and discontinuous problems can be calculated using the discontinuous deformation analysis (DDA) method by solving time steps, and this method is suitable for simulating the seismic dynamic response of engineering rock mass structures. However, the boundary setting must be carefully analyzed. In this paper, four boundary settings for the DDA method are investigated. First, the contributions to the DDA equations for nonreflecting boundaries (including the viscous boundary and the viscoelastic boundary) are deduced based on the Newmark method. Second, a free-field boundary is introduced in the DDA method with boundary grid generation and coupling calculation algorithms to accurately simulate external source wave motion, such as earthquakes. Third, seismic input boundary treatments are intensively examined, and the force input method is introduced based on nonreflecting boundaries. Finally, the staticdynamic unified boundary is implemented to ensure consistent boundary transformation. The boundary setting method in the DDA method is discussed, and the suggested treatments are used to analyze the seismic dynamic response of underground caverns.