No abstract

According to the molecular structure design requirements of the fluid loss additive resistant to high temperature, 2‐acrylamide‐2‐methyl propane sulfonic acid (AMPS), acrylamide (AM), dimethyl diallyl ammonium chloride (DMDAAC) and sodium styrene sulfonate (SSS) are selected as the structure monomers. Using ammonium persulfate as initiator, a new quadripolymer is synthesized through free radical aqueous solution polymerization. According to the minimum filtration loss of the fresh water‐based drilling fluid with 0.5 wt % quadripolymer, The synthesis conditions are optimized by orthogonal test: the mole ratio of AMPS/AM/DMDAAC/SSS is 5/7/2/1, the monomer concentration is 30 wt %, the initiator concentration is 0.8 wt %, the reaction temperature is 75°C and the pH is 10. The structure of the quadripolymer is characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance hydrogen spectroscopy. The results show that the quadripolymer contains all the designed functional groups. The thermal stability of the quadripolymer is tested by thermogravimetry, differential thermogravimetry, and differential scanning calorimetry. The results show that the thermal degradation of the quadripolymer is not obvious before 272.3°C. The rheological performance and filtration loss of the quadripolymer are evaluated. The results indicate that the filtration loss decreases with the increasing dosage of the quadripolymer before and after thermal aging test at 180°C for 16 h, and the filtration loss before the thermal aging test is smaller than that after the thermal aging test. The high temperature high pressure filtration loss (FL(HTHP)) experiment results also show that the quadripolymer fluid loss additive has excellent temperature‐resistant performance. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41762.

No abstract

Amine‐terminated hyperbranched polymer (HBP‐NH2), as an inhibitor in water‐based drilling fluid, is prepared by the polycondensation of diamine AB2 monomers. The primary amine and secondary amide structures are confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance hydrogen spectroscopy. Through time of flight mass spectrometry, the molecular weight of HBP‐NH2 is mainly distributed in the range of 200–1400. Also, the quasi‐spherical shape and the high temperature resistance (200 °C) performance of HBP‐NH2 are, respectively, certified through the environmental scanning electron microscope and the thermogravimetric analysis. In the inhibition performance test, the linear expansion rate of sodium bentonite in 3 wt % HBP‐NH2 aqueous solution is only 11.42%, which is lower than other inhibitors (KCl, FA‐367, and HPAM). Zeta potential analysis shows that HBP‐NH2 has a strong ability to inhibit the hydration and dispersion of sodium bentonite by protonated primary amine groups. Compared with the base slurry, the absolute value of zeta potential is reduced by 25.5 mV in the slurry containing 3 wt % HBP‐NH2 at 180 rpm. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45466.

No abstract

No abstract

No abstract

No abstract