TiO2nanocrystalline powders with high specific area were prepared using urea as the template by the sol-gel method. The samples were characterized by X-ray diffraction, N2adsorption isotherms, and transmission electron microscopy. Urea plays a key role in the preparation process of TiO2nanocrystalline powders. Large amounts of small urea aggregates were formed in the sol-gel process and decomposed during the calcination process, which results in the formation of large amounts of mesopores. Urea also inhibits the agglomeration and growth of the TiO2nanoparticle, which facilitates the preparation of a TiO2powder with smaller nanocrystal size. The above effects of urea may be the main reason of the as-prepared sample with very high specific surface area.
The non-isothermal crystallization kinetics with heating rates ranging from 10 K s-1to 80 K s-1and the isothermal crystallization kinetics during annealing from the glass transition temperature to the crystallization onset temperature of a Zr57Cu15.4Ni12.6Al10Nb5 amorphous alloy were studied in detail using X-ray diffraction and differential scanning calorimetry. During non-isothermal crystallization, it is more difficult to nucleate than to grow, and the crystallization resistance increases first and then decreases. During isothermal crystallization of the alloy from 713- 728 K, there are two exothermic peaks corresponding to a diffusion-controlled growth process with decreasing nucleation rate and increasing nucleation rate. From 733- 748 K, only one exothermic peak appears, and the growth process is controlled by the interface with decreasing nucleation rate. Isothermal crystallization is a process in which the crystallization resistance increases. The resistance of isothermal crystallization is less than that of non-isothermal crystallization.
The non-isothermal crystallization kinetics with heating rates ranging from 10 K s-1to 80 K s-1and the isothermal crystallization kinetics during annealing from the glass transition temperature to the crystallization onset temperature of a Zr57Cu15.4Ni12.6Al10Nb5 amorphous alloy were studied in detail using X-ray diffraction and differential scanning calorimetry. During non-isothermal crystallization, it is more difficult to nucleate than to grow, and the crystallization resistance increases first and then decreases. During isothermal crystallization of the alloy from 713- 728 K, there are two exothermic peaks corresponding to a diffusion-controlled growth process with decreasing nucleation rate and increasing nucleation rate. From 733- 748 K, only one exothermic peak appears, and the growth process is controlled by the interface with decreasing nucleation rate. Isothermal crystallization is a process in which the crystallization resistance increases. The resistance of isothermal crystallization is less than that of non-isothermal crystallization.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.