Hollow porous micro/nanostructures with high surface area and shell permeability have attracted tremendous attention. Particularly, the synthesis and structural tailoring of diverse hollow porous materials is regarded as a crucial step toward the realization of high-performance electrode materials, which has several advantages including a large contact area with electrolyte, a superior structural stability, and a short transport path for Li(+) ions. Meanwhile, owing to the inexpensive, abundant, environmentally benign, and renewable biological resources provided by nature, great efforts have been devoted to understand and practice the biotemplating technology, which has been considered as an effective strategy to achieve morphology-controllable materials with structural specialty, complexity, and related unique properties. Herein, we are inspired by the natural microalgae with its special features (easy availability, biological activity, and carbon sources) to develop a green and facile biotemplating method to fabricate monodisperse MnO/C microspheres for lithium-ion batteries. Due to the unique hollow porous structure in which MnO nanoparticles were tightly embedded into a porous carbon matrix and form a penetrative shell, MnO/C microspheres exhibited high reversible specific capacity of 700 mAh g(-1) at 0.1 A g(-1), excellent cycling stability with 94% capacity retention, and enhanced rate performance of 230 mAh g(-1) at 3 A g(-1). This green, sustainable, and economical strategy will extend the scope of biotemplating synthesis for exploring other functional materials in various structure-dependent applications such as catalysis, gas sensing, and energy storage.

The dominant microorganisms in Daqu were analysed using high‐throughput sequencing during fermentation. There were 16 dominant fungal species accounting for 90.8% of the total fungal abundance with Pichia kudriavzevii accounting for 43%. There were 18 dominant bacterial species accounting for 94% of the total bacterial abundance with Lactobacillus representing >50%. The succession pattern of the microbial populations showed that, prior to the top temperature, the microbial population was rich, consisting of Pichia (yeast), Aspergillus, Rhizopus (moulds), Weissella, Pediococcus and Lactobacillus (bacteria). During the top temperature phase, Thermoascus aurantiacus predominated. After this, in the final Daqu, the microflora were mainly yeasts (Pichia, Saccharomycetales) and the bacteria Lactobacillus, Bacillus, Weissella and Pediococcus. These results lay the foundation for further studies on functional microorganisms in the preparation and the mechanism of Daqu formation. © 2018 The Institute of Brewing & Distilling

No abstract

BackgroundPhotoautotrophic microalgae are a promising avenue for sustained biodiesel production, but are compromised by low yields of biomass and lipids at present. We are developing a chemical approach to improve microalgal accumulation of feedstock lipids as well as high-value alpha-linolenic acid which in turn might provide a driving force for biodiesel production.ResultsWe demonstrate the effectiveness of the small bioactive molecule “acetylcholine” on accumulation of biomass, total lipids, and alpha-linolenic acid in Chlorella sorokiniana. The effectiveness exists in different species of Chlorella. Moreover, the precursor and analogs of acetylcholine display increased effectiveness at higher applied doses, with maximal increases by 126, 80, and 60% over controls for biomass, total lipids, and alpha-linolenic acid, respectively. Production of calculated biodiesel was also improved by the precursor and analogs of acetylcholine. The biodiesel quality affected by changes in microalgal fatty acid composition was addressed.ConclusionThe chemical approach described here could improve the lipid yield and biodiesel production of photoautotrophic microalgae if combined with current genetic approaches.Electronic supplementary materialThe online version of this article (doi:10.1186/s13068-015-0196-0) contains supplementary material, which is available to authorized users.

The effects of trace elements on the lipid productivity and fatty acid composition ofNannochloropis oculata (N. oculata)were studied. The results showed that trace elements had a strong influence on not only the lipid productivity but also the fatty acid composition. The addition of Fe3+, Zn2+, Mn2+, Mo6+, and EDTA and the deletion of Cu2+and Co2+can increase the lipid productivity. The optimum concentrations of the trace elements in the culture medium are 6 times of Fe3+and EDTA, the same concentration of Zn2+, Mn2+, and Mo6+as the control group, but the optimum medium has no Cu2+or Co2+. Fe3+, Zn2+, Mn2+, Mo6+, and EDTA are indispensable during the EPA formation ofN. oculata. The addition of Fe3+, Zn2+, Mn2+, Mo6+, and EDTA can strongly increase the content of EPA in the lipid ofN. oculata, but the concentration of the trace elements had little influence on the level of EPA.

Microalgae possess higher photosynthetic efficiency and accumulate more neutral lipids when supplied with high-dose CO2. However, the nature of lipid accumulation under conditions of elevated CO2 has not been fully elucidated so far. We now revealed that the enhanced lipid accumulation of Chlorella in high-dose CO2 was as efficient as under heterotrophic conditions and this may be attributed to the driving of enlarged carbon source. Both photoautotrophic and heterotrophic cultures were established by using Chlorella sorokiniana CS-1. A series of changes in the carbon fixation, lipid accumulation, energy conversion, and carbon-lipid conversion under high-dose CO2 (1-10%) treatment were characterized subsequently. The daily carbon fixation rate of C. sorokiniana LS-2 in 10% CO2 aeration was significantly increased compared with air CO2. Correspondingly, double oil content (28%) was observed in 10% CO2 aeration, close to 32.3% produced under heterotrophic conditions. In addition, with 10% CO2 aeration, the overall energy yield (Ψ) in Chlorella reached 12.4 from 7.3% (with air aeration) because of the enhanced daily carbon fixation rates. This treatment also improved the energetic lipid yield (Ylipid/Es) with 4.7-fold, tending to the heterotrophic parameters. More significantly, 2.2 times of carbon-lipid conversion efficiency (ηClipid/Ctotal, 42.4%) was observed in 10% CO2 aeration, towards to 53.7% in heterotrophic cultures, suggesting that more fixed carbon might flow into lipid synthesis under both 10% CO2 aeration and heterotrophic conditions. Taken together, all our evidence showed that 10% CO2 may push photoautotrophic Chlorella to display heterotrophic-like efficiency at least in lipid production. It might bring us an efficient model of lipid production based on microalgal cells with high-dose CO2, which is essential to sustain biodiesel production at large scales.

A solid phase extraction (SPE) combination with gas chromatography-mass spectrometry (GC-MS) was developed for the determination of the migration of 25 primary aromatic amines (PAAs) from food contact plastic materials and articles. The samples were extracted by deionized water and 30 g/L acetic acid, and the pH value of the solution was adjusted to 8 - 10 with ammonia. The extracts were cleaned up and concentrated on an SPE column, then eluted by equal volume of methyl-tert-butyl ether and ethanol. The analysis of the target compounds was performed by GC-MS. The results indicated that the limits of detection were in the range of 0.4 -2.0 microg/kg for different PAAs. The recoveries and relative standard deviations (n = 7) of 10 microg/kg PAAs ranged from 51.6% -118.4% and 0.5% -9.8%, respectively, except the 2,4-diaminoanisole in the acid simulant. The effects of different experimental conditions such as the pH value and volume ratio of methyl-tert-butyl ether and ethanol were studied. The results showed that the method is accurate and stable, and could meet the requirement of the European Commission Regulation (EU) No 10/2011 for the determination of primary aromatic amines. It can be applied in the analysis of the primary aromatic amines in real food contact plastic material and article samples.

No abstract